Industrialization of plasma De-NOx system needs combination of various technologies technologies. This article introduces these many technologies and discusses the technical problems and their solutions. Such technologies include system design, efficiency requirements, component design method, plasma chemical reactions, optimization of process, scheme of the system, modification of discharge mo...

NOx removal from an actual boiler flue gas was investigated using a commercial ozonizor for indirect NO oxidation and a scrubber using Na2SO3 . The flue gas was in the range of 470~1,480 Nm/h, the gas temperature of 327C, and NOx concentration of 40 ppm. Approximately 80% of NOx removal efficiency was achieved during 180 min of system operation by maintaining pH of 8 and oxidation reduction pot...

In this research, an experimental study to evaluate nutrient removal from synthetic wastewater by a lab-scale moving bed biofilm process was investigated. Also, kinetic analysis of the process with regard to phosphorus and nitrogen removal was studied with different mathematical models. For nutrient removal, the moving bed biofilm process was applied in series with anaerobic, anoxic and aerobic...

[1] Trace gases including nitrogen dioxide (NO2), nitrate radical (NO3), ozone (O3), and a suite of volatile organic compounds (VOCs) were measured within the New England coastal marine boundary layer on Appledore Island (AI), Maine, USA as part of the International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) field campaign. These measurements, together with loc...

Electron-beam fl ue gas treatment (EBFGT) technology has been applied in an industrial scale, EPS Pomorzany [1]. High removal effi ciency of SO2 (>90%) and NOx (ca. 70%) was obtained at 8 kGy absorbed dose. NOx removal needs much bigger energy consumption than that for SO2. Therefore, there is a need to fi nd a way to decrease energy consumption for NOx removal in this process. Electron acceler...

Cu/Ba/bauxite possesses superior NOx storage and reduction (NSR) performances, high thermal stability, strong resistance against SO₂ poisoning and outstanding regeneration ability in comparison with Pt/Ba/Al₂O₃. It can serve as a cheap and promising alternative for traditional Pt/Ba/Al₂O₃ in NOx removal from lean-burn engines.

A novel chemical absorption-biological reduction (CABR) integrated process, employing ferrous ethylenediaminetetraacetate (Fe(II)EDTA) as a solvent, is deemed as a potential option for NOx removal from the flue gas. Previous work showed that the Fe(II)EDTA concentration was critical for the NOx removal in the CABR process. In this work, the pathway of FeEDTA (Fe(III)/Fe(II)-EDTA) transformation...

This paper reports improved performance of discharge plasma in filtered engine exhaust treatment. Our paper deals about the removal of NOX emissions from the diesel exhaust by electric discharge plasma. For the treatment of diesel exhaust a new type of reactor referred to as cross-flow dielectric barrier discharge reactor has been used, where the gas flow is perpendicular to the corona electrod...