Regarding the previous earthquake damages in offshore structures, as vital structures in the oil and gas industries, it is important that their seismic design will be performed with very high reliability. Accepting the Nonlinear Time History Analyses (NLTHA) as the most reliable seismic analysis method, in this paper an offshore platform of jacket type with the height of 304 feet and with a dec...

the nonlinear static procedures (nsps) proposed by design codes do not lead to reliable results especially for tall buildings. they generally provide inconsistent estimates of inelastic seismic demands, especially for the top floors due to their inabilities in considering the higher modes effects. in this paper, a new enhanced pushover procedure is proposed which is based on the envelope of the...

the base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. in this regard, the uniform building code provisions (ubc) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. due to the importance of the behavior of these structures unde...

Response modification factor (R factor) is one of the seismic design parameters to be considered in evaluating the performance of buildings during strong motions. This paper has tried to evaluate the response modification factor of concrete coupled shear wall structures with various length/depth ratios of spandrel beams. The effect of diagonal reinforcement of spandrel beam was also evaluated o...

pushover analysis is a simplified nonlinear analysis technique that can be used to estimate the dynamic demands imposed on a structure under earthquake excitations. one of the first steps taken in this approximate solution is to assess the maximum roof displacement, known as target displacement, using the base shear versus roof displacement diagram. that could be done by the so-called dynamic p...

the proposal lateral load pattern for pushover analysis is given in two forms for symmetric concrete buildings: 1-(x/h)0.5 for low-rise and mid-rise buildings, 2- sin(πx/h) for high-rise buildings. these two forms give more realistic results as compared to conventional load patterns such as triangular and uniform load patterns. the assumed buildings of 4, 8, 12, 16, 20 and 30 story concrete bui...

verifying the behavior of shear walls in a tall building requires reliable response results. this paper examined nonlinear fiber element modeling of a slender reinforced concrete shear wall during large-scale shaking table testing. the goal was to understand and validate the inelastic responses given by fiber models using time history analysis. reasonable agreement was found between the numeric...