Hydrocarbon (HC) assisted selective catalytic reduction (SCR) is an appealing technology for NOx reduction in oxygen excess. In particular, a catalyst formulation with silver supported on alumina (Ag/Al2O3) has been measured to have high activity for this reaction [1,2]. Although numerous experimental studies have clarified issues concerning the Ag/Al2O3 catalyst, the nature of the active phase...

Catalytic elimination of formaldehyde (HCHO) was investigated over Cu-Al2O3 catalyst at room temperature. The results indicated that no oxidation of HCHO into CO2 occurs at room temperature, but the adsorption of HCHO occurs on the catalyst surface. With the increase of gas hourly space velocity (GHSV) and inlet HCHO concentration, the time to reach saturation was shortened proportionally. The ...

Palladium nanoparticles were grown on sub-millimeter activated Al2O3 particle support by spraying H2PdCl4 solution evenly onto the support, followed with a thermal reduction under H2 atmosphere. Compared with its counterpart created by the conventional impregnation method, the Pd/Al2O3 catalyst created by the spray process could enrich the existence of active Pd nanoparticles on the surface of ...

Our group recently reproduced the water-assisted growth method, so-called "SuperGrowth", of millimeter-thick single-walled carbon nanotube (SWNT) forests by using C2H4/H2/H2O/Ar reactant gas and Fe/Al2O3, catalyst. In this current work, a parametric study was carried out on both reaction and catalyst conditions. Results revealed that a thin Fe catalyst layer (about 0.5 nm) yielded rapid growth ...

Molecular structure and vibrational frequencies of the novel surface enolic species intermediate on Ag/Al2O3 have been investigated by means of density functional theory (DFT) calculations and in situ infrared spectroscopy. The geometrical structures and vibrational frequencies were obtained at the B3P86 levels of DFT and compared with the corresponding experimental values. Theoretical calculat...

Ni-based catalysts as replacement for noble metal catalysts are of particular interest in the catalytic conversion of biomass due to their cheap and satisfactory catalytic activity. The Ni/SiO2 catalyst has been studied for the hydrogenolysis of glycerol, and doping with phosphorus (P) found to improve the catalytic performance significantly because of the formation of Ni2P alloys. However, in ...

Specimen transfer under controlled environment conditions, such as temperature, pressure, and gas composition, is necessary to conduct successive complementary in situ characterization of materials sensitive to ambient conditions. The in situ transfer concept is introduced by linking an environmental transmission electron microscope to an in situ X-ray diffractometer through a dedicated transmi...

A series of Pd-supported metal oxides (Al2O3, Fe2O3 and CeO2) have been prepared by a single step solution combustion synthesis (SCS). Their catalytic performance was evaluated for selective hydrogenation of cinnamaldehyde (CAL) to hydrocinnamaldehyde (HCAL) under atmospheric pressure of hydrogen at 100 °C. Among these materials, combustion synthesized Pd (2 at.%)/Al2O3 catalyst exhibits the hi...

We present the activities and selectivities of Pt/Al2O3-based catalysts in the production of hydrogen from methanol through catalytic decomposition. For the decomposition reaction, the Pt and Pd catalysts promoted by ceria exhibit similar activity reaching 100% conversion at 315 C. Promoting with ceria had a positive effect on activity and selectivity. Among all catalysts, the 9% Pt– 10% CeO2/A...

A series of N-heteroaryl formamides were efficiently synthesized from heteroarylamines and formic acid using Al2O3 nanoparticles as a heterogeneous catalyst under solvent-free conditions. The smaller size of Al2O3 nanoparticles with a higher surface to volume ratio has a promising catalytic activity, resulting in a short reaction times and high reaction yields under mild reaction conditions. Th...