In this study, the partial oxidation of iso-octane over Ni/Ce0.75Zr0.25O2 and Ni/β”Al2O3 catalysts was investigated. The results indicated that Ni/Ce0.75Zr0.25O2 is more active than Ni/β”-Al2O3. The partial oxidation products are mainly H2 and CO for Ni/Ce0.75Zr0.25O2 with hydrogen selectivity up to 85%. The H2/CO ratio is in the range of 1.3-2.0 depending on the operating temperature. It was n...

The adsorption properties of CO and H2 on iron-based catalyst with addition of Zr and Ni were investigated using temperature programmed desorption process. It was found that on the carburized iron-based catalysts, molecular state and dissociative state CO existed together. The addition of Zr was preferential for the molecular state adsorption of CO on iron-based catalyst and the presence of Ni ...

High yield of H2 of high purity from acetic acid, a model compound of bio-oil from the biomass fast pyrolysis, was produced by sorption enhanced steam reforming (SESR). An oxygen carrier was introduced into a chemical loop (CL) coupled to the cyclical SESR process to supply heat in situ for the endothermic sorbent regeneration, in order to increase the energy efficiency of the process. A new mu...

Nanometric Carbid Silicon (SiC) supported monometallic and bimetallic catalysts containing Fe, Co, Ni transition metals were prepared by wet impregnation method. Multiwall carbon nanotubes (MWCNTs) were synthesized over the prepared catalysts from catalytic decomposition of acetylene at 850°C by thermal chemical vapor deposition (TCVD) technique. The synthesized nanomaterials (catalysts and CNT...

Utilization of active and stable catalyst could have enormous advantages in industrial application of biogas reforming. In order to achieve this goal, the effects of Cu and Co as promoters were investigated over physical-chemical properties of Ni/Al2O3-ZrO2 catalyst in reforming of biogas. The sequential impregnation was used for preparation of catalysts. The catalysts were characterized using ...

One of the main reactions that can be used to reduce greenhouse gases emissions is Reverse Water Gas Shift (RWGS) reaction. Through this reaction CO2 is converted to CO to produce beneficial chemicals such as methanol. In this paper Mo/Al2O3 catalyst was prepared and then promoted with Ni ions through impregnation method to produce Ni-Mo/Al2O3 catalyst. The structures of the catalysts were stud...

Producing clean hydrogen from renewable resources will reduce our dependence on using fossil fuels towards a green and sustainable future. Biomass gasification is regarded as a promising technology for hydrogen production. In this work, low cost Ni-based catalyst was applied in a two-stage fixed bed reaction system. Fe was added into Ni-Al catalyst(80mol.% Al) by co-precipitation method with va...

Expanded multilayered vermiculite (VMT) was successfully used as catalyst support and Ni/VMT synthesized by microwave irradiation assisted synthesis (MIAS) exhibited excellent performance in our previous work. We also developed a two-dimensional porous SiO2 nanomesh (2D VMT-SiO2) by mixed-acid etching of VMT. Compared with three-dimensional (3D) MCM-41, 2D VMT-SiO2 as a catalyst support provide...

the nanoparticles of ni–si mixed oxides were prepared by co-precipitation method using nickel nitrate; ni(no3)2 6h2o and tetraethylorthosilicate (teos). the products were characterized by x-ray diffraction (xrd), transmission electron microscopy (tem), and hydrogen temperature program reduction (h2-tpr). the results revealed that ni–si mixed oxides particles were obtained with average particle ...

An alumina-supported nickel catalyst was prepared by impregnation of Ni2+ solution onto mesoporous alumina under microwave irradiation (denoted as M-Ni/Al2O3). For comparison, a catalyst with the same nickel content was prepared by conventional impregnation method (denoted as UM-Ni/Al2O3). Both M-Ni/Al2O3 and UM-Ni/Al2O3 catalysts were applied to the syngas (H2 + CO) production by methane oxy-s...