designing of a pid controller is a very common method for industrial process control and due to its very simple and efficient function; it is used in a wide variety of industrial applications. pid controller to reduce the steady state error and dynamic response of the system is used. pid controller design is an inevitable problem in setting the coefficients need to try a lot of trial and error,...

renewable energy sources like wind, sun, and hydro are considered as a reliable alternative to the traditional energy sources such as oil, natural gas, or coal. this paper describes modeling and simulations to determine a method for the power performance evaluation of autonomous wind turbine system. a speed control regulator is utilized to control the dc bus voltage. the inverter gate’s signals...

the aim of this paper is to investigate a novel approach for output feedback damping controller design ofstatcom in order to enhance the damping of power system low frequency oscillations (lfo). the design ofoutput feedback controller is considered as an optimization problem according with the time domain-basedobjective function which is solved by a honey bee mating optimization algorithm (hbmo...

this paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. our rotary inverted pendulum is supported bya pivot arm. the pivot arm rotates in a horizontal plane by means of a servomotor. the opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. a pendulum is suspended at thejoint. the task is to design a contro...

In this paper, a robust tracking control method for automatic take-off and trajectory tracking of a quadrotor helicopter is presented. The designed controller includes two parts: a position controller and an attitude controller. The attitude controller is designed by using the sliding mode control (SMC) method to track the desired pitch and roll angles, which are the output of position controll...

in this paper, a robust tracking control method for automatic take-off and trajectory tracking of a quadrotor helicopter is presented. the designed controller includes two parts: a position controller and an attitude controller. the attitude controller is designed by using the sliding mode control (smc) method to track the desired pitch and roll angles, which are the output of position controll...

Because of extreme local saturation at pole tips of excited phase and uncircular shape of rotor and stator, a Swithed Reluctance Motor (SRM) does not have a simple and accurate mathematical model. Therefore, the output control of this motor requires a robust controller which is not based on an accurate model of the process. Fuzzy controllers, to some extent, will satisfy these requirements. Tet...

model predictive controller is widely used in industrial plants. uncertainty is one of the critical issues in real systems. in this paper, the direct adaptive simplified model predictive control (smpc) is proposed for unknown or time varying plants with uncertainties. by estimating the plant step response in each sample, the controller is designed and the controller coefficients are directly ca...

in this paper, a new structure possessing the advantages of low-power consumption, less hardware and high-speed is proposed for fuzzy controller. the maximum output delay for general fuzzy logic controllers (flc) is about 86 ns corresponding to 11.63 mflips (fuzzy logic inference per second) while this amount of the delay in the designed fuzzy controller becomes 52ns that corresponds to 19.23 m...