In the emerging issue of increased multi-resistant properties in food borne pathogens, zinc oxide (ZnO) and nano-particle zinc oxide (nano-ZnO) are being used increasingly as antimicrobial agents. Thus, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of nano-ZnO towards pathogens microbes Bacillus subtilus NRRL B-543, Bacillus megaterium ATCC 25848, Staph...

Minimally processed pomegranate rapidly loses its overall quality because of high water loss and microbial contamination. Nano-ZnO in combination with carboxymethyl cellulose (CMC) coating was used on pomegranate arils. Arils were dipped for 4min in distilled water (control), 0.1 or 0.2% (w/v) nano-ZnO suspension and then ZnO treated arils were coated with 0.5% (w/v) CMC and stored for 12days a...

The influence of different application methods on UV protective properties of white and dyed cotton functionalized with ZnO nanoparticles (nano-ZnO) was investigated. The methods differ in application procedure, time of treatment and auxiliaries used in the treating bath. The ultraviolet protection factor (UPF) was determined for untreated and functionalized samples. The presence of nano-ZnO on...

The aim of this study was to compare the effect of dietary supplementation with low dose of porous and nano zinc oxide (ZnO) on weaning piglets, and to evaluate the possibility of using them as an alternative to high dose of regular ZnO. Piglets were randomly allocated into four treatment groups fed with four diets: (1) basal diet (NC), (2) NC+ 3000 mg/kg ZnO (PC), (3) NC + 500 mg/kg porous ZnO...

The objective of this study was to quantify the influence of zinc oxide nanoparticles (nanoZnO) on the water repellency and dimensional stability of beech wood. Beech wood blocks were treated with a nano-ZnO solution at four treatment levels (0, 10,000, 20,000, and 40,000 ppm) using a modified dip method. Also, a thermal treatment was performed at 60 and 120°C. After conditioning the samples, w...

ZnO nano-particles with a diameter of 10-20 nm were fabricated under oxygen and helium mixture plasma circumstance by evaporating Zn target using pulsed laser ablation. Cathodoluminescence technique, combined with transmission electron microscopy, X-ray diffraction and energy-dispersive spectrometer, was applied to study luminescence property and crystalline structure of ZnO nano-particles. Var...

This study focused on the effects of zinc oxide nanoparticles (nano-ZnO) on spatial learning and memory and synaptic plasticity in the hippocampus of young rats, and tried to interpret the underlying mechanism. Rats were randomly divided into four groups. Nano-ZnO and phosphate-buffered saline were administered in 4-week-old rats for 8 weeks. Subsequently, performance in Morris water maze (MWM)...

nanocomposite of zro2/zno was prepared under ultrasonic irradiation by sol gel process from directly mixing zirconium and zinc gels. the mixture was placed under ultrasonic irradiation for 2 hours. after the aging time and filtration of the reaction mixture, the filtrated composite gel was calcinated at 500 °c for 3h in furnace. the precursor gels of zirconium and zinc were prepared from dissol...

zno and mn-zno nano powders were prepared by the sol-gel auto combustion method. the products were characterized by x-ray diffraction (xrd), energy dispersive analysis of x-ray (edx) and scanning electron microscopy (sem). structural and morphological properties of nano particles were investigated and the average crystalline size of zno and mn-doped zno was obtained 44 and 51 nm, respectively. ...

ZnO nano/microstructures have been formed by thermal evaporation method using ZnO powders mixed with carbon group elements (C, Si, Ge, Sn, or Pb) as the reducing agent. For cases of mixed precursors of ZnO/C, ZnO/Si, and ZnO/Ge, the pure ZnO nano/microstructures are realized, while for ZnO/Sn (ZnO/Pb) systems, the phase of Pb2O3(Zn2SnO4) generally are represented in the ZnO products. The appear...