Nano-sized TiCx/2009Al composites (with 5, 7, and 9 vol% TiCx) were fabricated via the combustion synthesis of the 2009Al-Ti-CNTs system combined with vacuum hot pressing followed by hot extrusion. In the present study, CNTs were used as the carbon source to synthesize nano-sized TiCx particles. An attempt was made to correlate the effect of ground CNTs by milling and the distribution of synthe...

In this paper, strontium ferrite (SrO.6Fe2O3) was synthesized by the sol-gel auto-combustion process. The thermal behavior of powder obtained from self-propagating combustion of initial gel was evaluated by simultaneous differential thermal analysis (DTA) and thermo gravimetric (TG), from room temperature to 1200°C. The as-burnt powder was calcined at various temperatures from 700-900°C to achi...

The TiCp/Cu master alloy was prepared via thermal explosion reaction. Afterwards, the nano-sized TiCp/Cu master alloy was dispersed by electromagnetic stirring casting into the melting Cu-Cr-Zr alloys to fabricate the nano-sized TiCp-reinforced Cu-Cr-Zr composites. Results show that nano-sized TiCp can effectively refine the grain size of Cu-Cr-Zr alloys. The morphologies of grain in Cu-Cr-Zr c...

Silicon crystallizes in the diamond-cubic phase and shows only a weak emission at 1.1 eV. Diamond-hexagonal silicon however has an indirect bandgap at 1.5 eV and has therefore potential for application in opto-electronic devices. Here we discuss a method based on advanced silicon device processing to form diamond-hexagonal silicon nano-ribbons. With an appropriate temperature anneal applied to ...

The study describes the synthesis and characterization of zinc(II) minoxidil nanocomposite (1). The reaction between zinc(II) acetate, minoxidil, {C9H15N5O=minoxidil=(2,4-diamino-6-piperidine-1-yl) pyrimidine N-oxide)} as a ligand and KI as bridging agent, in methanol at 60°C leads to the formation of nano-sized Zn(II) minoxidil nanocomposite, 1. Characterization of (1) was carried out by eleme...

piezoelectric nanobeams having circular, rectangular and hexagonal cross-sections are synthesized and used in various nano structures; however, piezoelectric nanobeams with hexagonal cross-sections have not been studied in detail. in particular, the physical mechanisms of the surface effect and the role of surface stress, surface elasticity and surface piezoelectricity have not been discussed t...

in this research, the influence of adding micro- and nano- sized calcium carbonate powders to nylon-66 was investigated. mechanical properties of micro and nano- composites, including tensile strength, elongation, and young’s modulus, before and after ageing, were determined and analyzed. for this purpose, micro- and nano-sized caco3 particles were used as fillers to prepare micro-composites (c...

powders at millimeter waves Konstantin A. Korolev, John S. McCloy, and Mohammed N. Afsar Department of Electrical and Computer Engineering, Tufts University 161 College Avenue, Medford, Massachusetts 02155, USA Extremely High Frequency Medical and Technical Association 11-7 Mokhovaya Street, Moscow 125009, Russia Glass and Materials Science Team, Pacific Northwest National Laboratory, Richland,...

in the present work, high temperature tensile properties of medium density polyethylene (mdpe) and its nanocomposites are investigated. for this purpose mdpe reinforced with different weight percentages of nano-sized calcium (2, 5, 10) are produced by compression moulding method. tensile tests have been carried out at different temperatures, i.e. 30, 60, 90c using thermomechanical analysis (tm...

In this paper, ZnO thin film is deposited on slide glass substrate using the sol-gel process. Presenting well-defined orientation of ZnO thin films Nanostructure were obtained by dip coating of zinc acetate dihydrate, monoethanolamine (MEA), de-ionized water and isopropanol alcohol. The annealed ZnO thin films were transparent ca 85-90% in visible range with an absorption edges at about 375 nm....