We report the optimized synthesis and electrochemical characterization of a composite of few-layered nanostructured MoS2 along with an electroactive metal oxide BiVO4. In comparison to pristine BiVO4, and a composite of graphene/BiVO4, the MoS2/BiVO4 nanocomposite provides impressive values of charge storage with longer discharge times and improved cycling stability. Specific capacitance values...

Recent studies have clearly indicated the favorable effect of lead as a growth promoter for MX2 (M = Mo, W; X = S, Se) nanotubes using MX2 powder as a precursor material. The experimental work indicated that the lead atoms are not stable in the molybdenum oxide lattice ion high concentration. The initial lead concentration in the oxide nanowhiskers (Pb:Mo ratio = 0.28) is reduced by one order o...

A novel electrocatalyst of layered MoS2 supported on reduced graphene oxide (RGO) decorated with nano-sized tungsten carbide (WC) shows an enhanced catalytic performance in the hydrogen evolution reaction, which could be attributed to the presence of a conductive and electrocatalytically-active nano-WC dispersant and the positive synergistic effect between nano-WC/RGO and layered MoS2.

Highly efficient and stable MoS2 nanocrystals on graphene sheets (MoS2/GR) are synthesized via a hybrid microwave annealing process. Through only 45 second-irradiation using a household microwave oven equipped with a graphite susceptor, crystallization of MoS2 and thermal reduction of graphene oxide into graphene are achieved, indicating that our synthetic method is ultrafast and energy-economi...

Molybdenum disulfide (MoS2)/cadmium sulfide (CdS) heterojunction solar cells were successfully synthesized via chemical bath deposition (CBD) and chemical vapor deposition (CVD). The as-grown CdS film on a fluorine tin oxide (FTO) substrate deposited by CBD is continuous and compact. The MoS2 film deposited by CVD is homogeneous and continuous, with a uniform color and a thickness of approximat...

The use of UHMWPE has attracted the attention of many researchers and industries. The aim of the present work is to fabricate UHMWPE/MoS2-Oxide nano-composites using in-situ polymerization. For this purpose, modified molybdenum disulfide was used. In order to perform the polymerization, a Ziegler-Natta catalytic system, with MoS2-Oxide and magnesium Ethoxide as support, was used. In order to fa...

Inspired by the ternary structure of natural nacre, robust ternary artificial nacre is constructed through synergistic toughening of graphene oxide (GO) and molybdenum disulfide (MoS2) nanosheets via a vacuum-assisted filtration self-assembly process. The synergistic toughening effect from high mechanical properties of GO and lubrication of MoS2 nanosheets is successfully demonstrated. Meanwhil...

Transistors based on MoS2 and other TMDs have been widely studied. The dangling-bond free surface of MoS2 has made the deposition of high-quality high-k dielectrics on MoS2 a challenge. The resulted transistors often suffer from the threshold voltage instability induced by the high density traps near MoS2/dielectric interface or inside the gate dielectric, which is detrimental for the practical...

We study the channel width scaling of back-gated MoS2 metal–oxide–semiconductor field-effect transistors from 2 μm down to 60 nm. We reveal that the channel conductance scales linearly with channel width, indicating no evident edge damage for MoS2 nanoribbons with widths down to 60 nm as defined by plasma dry etching. However, these transistors show a strong positive threshold voltage (VT ) shi...

Hydrogen generation from water using noble metal-free photocatalysts presents a promising platform for renewable and sustainable energy. Copper-based chalcogenides of earth-abundant elements, especially Cu2ZnSnS4 (CZTS), have recently arisen as a low-cost and environment-friendly material for photovoltaics and photocatalysis. Herein, we report a new heterostructure consisting of CZTS nanopartic...