There is considerable interest in processing technologies which can lead to more energy efficient sintering of metal powders. The use of microwave sintering in particular leads to reduced energy usage during sintering as the volumetric heating process is considerably more efficient compared with resistance heating. In this study the use of a novel plasma microwave processing technology for the ...

STATEMENT OF PROBLEM The fabrication of zirconium dioxide (ZrO2) dental prosthetic substructures requires an extended sintering process (8 to 10 hours) in a conventional oven. Microwave sintering is a shorter process (2 hours) than conventional sintering. PURPOSE The purpose of this study was to compare the fracture toughness of 3 mol % Y2O3-stabilized ZrO2 sintered in a conventional or micro...

Tungsten based composites such as W–Cu have been widely used as electrical contacts, especially in heavy duty applications and as spark erosion electrodes. The lack of solubility between tungsten and copper makes it very difficult to achieve full densification through liquid phase sintering. Higher sintering temperatures or longer holding times always help to improve the densification but Cu ma...

microwave energy has potential for the efficient heating of minerals. minerals or materials, which couple to microwave energy are called dielectrics and many valuable minerals are found to be dielectric. the mineral ilmenite is one which shows good dielectric heating characteristics. in this paper, the effect of microwave heat energy on the partial reduction of oxidized ilmenite oxidized in ...

Microwave processing is emerging as an innovative and highly effective material processing method offering many advantages over conventional methods, especially for sintering applications. It is recognized for its various advantages, such as: time and energy saving, rapid heating rates, considerably reduced processing cycle time and temperature, fine microstructures and improved mechanical prop...

An investigation of the photoluminescent properties and crystalline morphology of blue emitting LiBa1-xPO4:xTm3+ phosphors with various concentrations (x = 0.005-0.030) of Tm3+ ions were synthesized by microwave sintering. For comparison, the LiBa1-xPO4:xTm3+ powders sintered at the same sintering condition but in a conventional furnace were also investigated. LiBaPO₄ without second phase was f...

In this study, a combustion synthesized AlN powder was sintered using microwave as heating source. The microwave was 2.45 GHz and the sintering process was carried out in a single-mode cavity. The sintering temperature was between 1800°C and 2000°C with a power ranging from 400 to 700W. The as-synthesized AlN was ground to under 2μm and yttria was used as sintering aid. The effects of the amoun...

Low-melting H3BO3, acting as sintering aid, was used to reduce the sintering temperature of 5 wt.% CaTiO3-doped (Zn0.65Mg0.35)TiO3 ceramics. The sintering behaviors, microstructures and microwave dielectric properties with different amounts of H3BO3 addition were investigated. The results showed that H3BO3 additive was very effective for lowering the sintering temperature and improving the bulk...

The nature of microwave sintering cannot be explained in the past and has been generally called microwave effect. Here we show that the E-field intensification is the reason of microwave fast sintering of solid state inorganic compounds. The intensification degree varied with dielectric constant of compound, distance between two particles, angle between the direction of E-field and the normal t...

Municipal solid waste incineration fly ash is generated in a significant amount; it is classified as hazardous waste in Taiwan. In order to reduce the volume of treated fly ash, a sintering technology can be considered. However, a traditional sintering consumes too much energy because of the limit of heat transfer. Hence, a microwave process which can provide quick, uniform, and selective heati...