Abstract In the present study, aim is to experimentally measure isobaric specific heat, viscosity and thermal conductivity of different magnesium oxide (MgO) nanoparticles concentrations dispersed in ethylene glycol/ water mixture with ratio 50:50 vol% as a base fluid. The experiments were performed on 20 nm particle size MgO suspended fluid volume fractions from 0.25 1% temperature range 40 12...

This study investigated a simple model of transformers that have liquid magnetic cores with different concentrations of ferro-nanofluids. The simple model was built on a capillary by enamel-insulated wires and with ferro-nanofluid loaded in the capillary. The ferro-nanofluid was fabricated by a chemical co-precipitation method. The performances of the transformers with either air core or ferro-...

The conventional liquids have some limitations regarding the thermal properties. The nanoparticles addition is one of the techniques which can modify them. In this research, heat transfer coefficient (h) and pressure loss (Δp) of various nanofluids containing Al2O3, SiO2 and MgO nanoparticles dispersed in water in an annular tube with constant wall temperature were numerically considered. Accor...

This paper addresses entropy generation in the flow of an electrically-conducting couple stress nanofluid through a vertical porous channel subjected to constant heat flux. By using the Buongiorno model, equations for momentum, energy, and nanofluid concentration are modelled, solved using homotopy analysis and furthermore, solved numerically. The variations of significant fluid parameters with...

Output performance of a thermoelectric-based automotive waste heat recovery system with a nanofluid coolant is analyzed in this study. Comparison between Cu-Ethylene glycol (Cu-EG) nanofluid coolant and ethylene glycol with water (EG-W) coolant under equal mass flow rate indicates that Cu-EG nanofluid as a coolant can effectively improve power output and thermoelectric conversion efficiency for...

In this paper, we investigate the effect of adding a stabilizer on the dynamic thermal properties of ZnO nanofluid (containing 5 to 10 nm diameter of ZnO nanocrystals) measured using a 3ω method. Addition of the stabilizer leads to the stabilization of the nanofluid and also substantial reduction of the enhancement of thermal transport compared to that seen in the bare ZnO nanofluid. This also ...

Forced convection boundary layer magnetohydrodynamic flow of a nanofluid over a permeable stretching plate is studied in this paper. The effects of suction-injection and viscous dissipation are taken into account. The nanofluid model includes Brownian motion and thermophoresis effects. The governing momentum, energy, and nanofluid solid volume fraction equations are solved numerically using an ...

In this paper the thermal convective instabilities of a binary nanofluid is theoretically investigated. In order to analyze a binary nanofluid, an addition factor is proposed under linear stability theory which is applied to the stability analysis of normal fluid. The factor describes the effect of nanoparticles on the convective instability of a basefluid. The Soret effect which represents the...

The goal of this paper is to experimentally study the behavior of nanofluid to improve the performance of a circular heat pipe. Pure water and Al2O3-water based nanofluid are used as working fluids. An experimental setup is designed and constructed to study the heat pipe performance under different operating conditions. The effect of filling ratio, volume fraction of nano-particle in the base f...