The previous study on low mole ratio urea-formaldehyde (UF) and ureamelamine–formaldehyde (UMF) resins synthesized in the typical way as particleboard binders was repeated with the inclusion of a strong acidic reaction step at a mole ratio of 2.7 in the beginning of the resin synthesis procedure. The resulting UF and UMF resins showed longer storageand pot-lives, longer gel times, and the parti...

The objective of this study is to evaluate the effect of décor paper and resin type on physical properties, mechanic properties, and surface quality properties of particleboards coated with décor papers impregnated by using different resin. White oak, New wenge and common maple pattern decor papers impregnated with urea formaldehyde (UF), melamine formaldehyde (MF) and urea-melamine formaldehyd...

A previous study of synthesizing low mole ratio urea–formaldehyde (UF) and urea–melamine–formaldehyde (UMF) resins, which included an acidic reaction step at the beginning of the typical resin synthesis procedure to obtain higher uron-type methylene–ether group contents, was repeated with the acidic reaction step extended to a higher viscosity. Compared to previous resins, the synthesized resin...

Urea-formaldehyde (UF) resin (F/U: 1.25), melamine-urea-formaldehyde (MUF) resin (F/(U+M): 1.05), and three kinds of wood species including poplar (Populus davidiana Dode), beech (Fagus engleriana Seem.), and eucalyptus (Eucalyptus robusta Smith) were used to produce plywood. The effects of sealing treatment and wood species on the formaldehyde emissions were studied. The anatomical characteris...

Life-cycle inventory (LCI) data are needed to scientifically document the environmental performance of formaldehyde-based resins used in the manufacture of wood composite products. The resin data are needed by others to conduct LCI studies of wood composites when providing performance data for applications as governed by the many green building standards, purchasing guidelines, and energy and c...

Influence of the excess monomer within the synthetic reaction solution of melamine resin microspheres (MFMSs) on the surface-enhanced Raman spectroscopy (SERS) enhancement from Rhodamine 6G (R6G) was investigated, where the R6G was adsorbed on the silver nanoparticles (AgNPs) that were loaded on the MFMSs. Surface characteristics of the MFMSs were modified by the excess monomer (i.e., the exces...

A powdery product was obtained by the reaction of methylolated melamine with alkyl resorcinols to form melamine-bridged alkyl resorcinols (MARs). The effects of the addition of this powder on the bonding strength and formaldehyde emission of urea–formaldehyde (UF) resins were investigated. Three types of UF resins with a formaldehyde/urea molar ratio of 1.3 synthesized by condensation at pH 1.0...

Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...