نتایج جستجو برای: martensite reversion
تعداد نتایج: 7389 فیلتر نتایج به سال:
During laser-based powder bed fusion, the non-equilibrium solidification conditions promote local elemental segregation, leading to a characteristic microstructure composed of cellular walls. These walls can display either low carbon BCC martensite or FCC retained austenite crystal structures, thus affecting subsequent isochronal isothermal phase transformation mechanisms. In present study, eff...
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
Near-equiatomic Ni-Ti, known for its shape memory behavior, can decompose to martensitic phases and/or second phase compounds. This phase competition is investigated in NixTi100-x (49<x<55) in as-quenched (AQ) and shock-loaded states. Dynamic loading was done with direct drive laser pulses of nanosecond duration; shocked samples were recovered for analysis. Unexpectedly, the lowest-Ni alloy (x ...
Austenitic stainless steels are extensively used in various applications requiring good corrosion resistance and formability. In the current study, the formation of nano/ ultrafine grained austenitic microstructure in a microalloyed AISI 304L stainless steel was investigated by the advanced thermomechanical process of reversion of strain-induced martensite. For this purpose, samples were subjec...
The y(FCC)tt&(HC) transformation is studied by light optical microscopy and scanning electron microscopy in a polycrystalline Fe-Mn-Si-Cr-Ni shape memory alloy. Thermal and stress-induced martensites are both studied to point out differences. A color etching method permitted to clearly observe morphological evolutions during the transformation and its reversion. Deformations of a golden microgr...
Microstructural evolutions during annealing of cold rolled AISI 304L and AISI 316L stainless steels were studied. Cold rolled AISI 304L alloy was fully martensitic but cold rolled AISI 316L alloy was partially martensitic due to the higher stability of the austenite phase in the latter. During continuous heating to elevated temperatures, the complete reversion of strain-induced martensite at 75...
The martensite-to-austenite reversion mechanisms under continuous heating and annealing of metastable austenitic stainless steel subjected to cold swaging were studied. reversion-temperature-time diagram was constructed using high-resolution dilatometry. revealed a sequence martensitic diffusional recrystallization. Martensitic might be separated by the rate >10 °C/s. started via mechanism, ...
In this investigation, the effect of grain size on the corrosion behavior of 304L stainless steel has been studied. Samples with grain sizes of 0.5, 3 and 12 micrometers were fabricated through formation of strain-induced martensite by 80% cold rolling of the stainless steel sheets at -15 °C and its reversion to austenite during annealing at 900 °C for 1, 5 and 180 min. The corrosi...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید