Steel manufacturers conduct quality control testing for a range of metals and trace elements to ensure the grade and performance of their final product. The Standardization Administration of China uses their GB/T 20125-2006 standard “Low-alloy steel – Determination of multi-element contents – Inductively coupled plasma atomic emission spectrometric method” to control the quality of manufactured...

eaf plants normally consume coal and coke as reactants, alloying elements, or fuel. the price of these materials varies from € 0.20-0.35/kg. this is while nearly 10 million pieces of tires are annually discarded in iran. the present study shows that scrap tires can be used as a substitute for coal and coke in eaf plants. thirteen grades of steel including low, medium, and high carbon steels as ...

Abstract: During the last decade, the demand for natural gas has steadily increased for the prevention of environmental pollution. For this reason, many liquefied natural gas (LNG) carriers have been manufactured. Since one of the most important issues in the design of LNG carriers is to guarantee structural safety, the use of low-temperature materials is increasing. Among commonly employed low...

alloy steel, which is versatile in such qualities as grade, property and application, can play an important role in the technical and economic development of the country. the present consumption of the key industrial sector to this strategic material, specified basically as semi- finished products exceeds 100,000 tons per year. however, a rough estimation of the true potential needs, does clear...

This paper was aimed to address the modeling and optimization of factors affecting the corrosive wear of low alloy and high carbon chromium steel balls. Response surface methodology, central composite design (CCD) was employed to assess the main and interactive effects of the parameters and also to model and minimize the corrosive wear of the steels. The second-order polynomial regression model...

Surface treatments of engineering materials are important for serviceable engineering components. One of the thermo-chemical surface treatments of steel based materials is the boriding process. In this study, low alloy steel substrates were borided by pack boriding process at 900 C. Experimental indentation tests were conducted on Dynamic Ultra-micro Hardness test machine, under applied peak lo...

The microstructure of HP stainless steel in aged and aged + solution annealed conditions and solutionized alloy 800 was characterized by optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) equipped by EDS. All phases present in the above condition were described. The effects of solution annealing heat treatment temperature on the microstructure, te...

OBJECTIVE The objective of this study was to test the hypothesis that there is no difference between stainless steel and low-nickel stainless steel wires as regards mechanical behavior. Force, resilience, and elastic modulus produced by Quad-helix appliances made of 0.032-inch and 0.036-inch wires were evaluated. METHODS Sixty Quad-helix appliances were made, thirty for each type of alloy, be...

The ablation interaction between a laser and solid samples, which affects the analytical performance for laser ablation inductively coupled plasma atomic emission spectrometry (LA-ICP-AES), was studied. The emission intensities of elements observed by LA-ICP-AES (LA-ICP-AES element signal intensities) for different solid samples were measured under different laser defocusing conditions with a f...

The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...