this paper presents the method of reducing torque ripple of brushless dc (bldc) motor. the commutation torque ripple is reduced by control of the dc link voltage during the commutation time. the magnitude of voltage and commutation time is estimated by a neural network and optimized with an optimization method named particle swarm optimization (pso) algorithm analysis. the goal of optimization ...

A conventional high power DC power supply systems consist of a three-phase diode rectifier followed by a high frequency converter to supply loads at regulated DC voltage. These rectifiers draw significant harmonic currents from the utility, resulting in poor input power factor. In this paper, a DC power supply based on dual-bridge matrix converter (DBMC) with reduced number of switches is p...

variation of frequency and voltage by load changes in a microgrid is a challenge in droop control method. centralized restoration frequency or voltage in a microgrid requires communication link and therefore affects the advantage of decentralized droop control such as reliability, simplicity and inexpensiveness. this paper proposes a decentralized method that restores the frequency of a microgr...

Electric traction trains are huge non-linear single-phase loads influencing adversely on power quality parameters on the grid side. Hybrid power quality conditioner (HPQC) has been utilized to compensate current unbalance, harmonics, and low power factor in the co-phase traction system simultaneously. By incrementing the traction load, the rating of the HPQC increases and may constraints its ap...

The commutation process causes current ripple to be generated in the drive system of brushless DC (BLDC) motor. This, in turn, leads to output torque ripple. Mechanical vibration and acoustic noise are its influences which are undesirable phenomenon in some applications. A new method is presented in this paper which reduces torque ripple and commutation period in the entire range of motor speed...

this paper presents a new control structure to reduce torque ripple in switched reluctance motor. although srm possesses many advantages in motor structure, it suers from large torque ripple that causes some problems such as vibration and acoustic noise. in this paper another control loop is added and torque ripple is de ned as an objective function. by using fuzzy sliding mode strategy, the dc...

Microturbine generation system is one of the most promising and a fast growing distributed generation sources. It is used in various applications thanks to high efficiency, quick start and high reliability. Combination of the microturbine and storage system (e.g. battery bank) is desirable selection to satisfy the load requirements under all conditions and hence the battery bank can play an imp...

In this paper, a high frequency contactless power transfer (CPT) system is designed with ∅2 inverter drive. This system works in 30MHz frequency and 380W power with low voltage stress and considers the inductive link parasitic capacitor effect. In the design, we formulated the inverter equations first and then suggested another design for the transmitter and the receiver coils as the energy tra...

This paper presents a novel concept of utilizing the photo voltaic solar farm inverter as STATCOM(Static Compensator), named PV-STATCOM, in order to improve the voltage profile of the power system. The entire STATCOM is able to transmit either active or reactive power into the grid. This system is connected to a 14 BUS IEEE standard grid as a case study to simulate the performance of the system...