The laser tube bending process (LTBP) is a thermal non-contact for tubes with less springback and thinning of the tube. In this paper, will be studied experimentally. length irradiation scheme are two main affecting parameters in LTBP process. For purpose, different samples according to schemes (Circular irradiating (CIS) axial (AIS)) lengths beam (from 4.7 28.2 mm) fabricated. angle laser-bent...

Thin-walled tube bending is still to be considered a new and advanced technique. The process has been adopted into several industries such as aero and automotive. This process may produce a wrinkling, bulking and tearing phenomenon if the process parameters are inappropriate, especially for tubes with large diameter and thin wall thickness. Push bending process is one of the methods used for be...

Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...

Thin-walled tube bending has common applications in the automobile and aerospace industries. The rotary-draw-bending method is a complex physical process with multi-factor interactive effects and is one of the advanced tube forming processes with high efficiency, high forming precision, low consumption and good flexibility for bending angle changes. However, it may cause a wrinkling phenomenon,...

Abstract—Rotary draw bending is a method which is being used in tube forming. In the tube bending process, the neutral axis moves towards the inner arc and the wall thickness distribution changes for tube’s cross section. Thinning takes place in the outer arc of the tube (extrados) due to the stretching of the material, whereas thickening occurs in the inner arc of the tube (intrados) due to th...

In this paper the process of laser forming has been investigated using an analytical and an experimental method for three levels scans velocity. A coupled analysis has been performed in ANSYS®. Also in order to prove the predictive methods, experiments on thin sheet metals have been done when a laser of a fair power was used. Before done, experiments were designed with full factorial chosen as ...

Laser beam forming has emerged as a viable technique to form sheet metal by thermal residual stresses. Although it has been a subject of many studies, its full industrial application is not yet established. This article aims to complement the existing research in the area of laser forming in order to gain a better understanding of the process. A numerical investigation of laser forming of stain...

Laser beam forming has emerged as a viable technique to form sheet metal by thermal residual stresses. Although it has been a subject of many studies, its full industrial application is not yet established. This article aims to complement the existing research in the area of laser forming in order to gain a better understanding of the process. A numerical investigation of laser forming of stain...

Laser beam forming has emerged as a viable technique to form sheet metal by thermal residual stresses. Although it has been a subject of many studies, its full industrial application is not yet established. This article aims to complement the existing research in the area of laser forming in order to gain a better understanding of the process. A numerical investigation of laser forming of stain...