the modeling of kinetic and isotherm curves acquired in adsorption of polycyclic aromatic hydrocarbons (pahs) as a model compound (phenanthrene) on activated carbons in the organic solvent. all the runs were carried out in a batch system at atmospheric pressure, process temperature of 24±2°c, and using the 100 ml phenanthrene in cyclohexan. this experimental work was mainly focused on the study...

batch experiments were conducted to study the adsorption behaviors of lead ion (pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (bet). the adsorption removal of pb2+ by the three ferrihydrites (called fh-1, fh-2 and fh-3, respectively) were compared, and fh-3 shows fast adsorption kinetics as well as high adsorption capacities, t...

in this study, bimodal meso-porous silica (uvm-7) synthesized and fabricated amino silane modified supports were characterized by powder x-ray diffraction (xrd), n2 adsorption/desorption, transmission electron microscope (tem), elemental analysis and titration. capacity of co2 capture on modified bimodal pore structure silica at 70°c was calculated using breakthrough curves; and it was found th...

environment contamination by heavy metals is a major issue threatening human health. adsorption is one of the biological processes for removing toxic metals from wastewater. the aim of this study was to determine the rate of lead biosorption from industrial wastewater by spirulina platensis. this laboratory scale experimental study was performed during april 2014 to october 2014 in environmenta...

in this research, adsorption of dibenzothiophene (dbt) as a model of sulfur containing material has been studied by pb exchanged y-zeolite under different experimental conditions. the adsorption was kinetically fast and high adsorption capacity was obtained. the equilibrium adsorption data were analyzed using langmuir and freunlich isotherm models. the corresponding parameters and correlation c...

AlMCM-41 was applied for adsorption of methylene blue (MB) and auramine (AU) in single and binary component systems. In the single component systems, AlMCM-41 represents higher adsorption capacity for MB than AU with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚C for MB and AU, respectively. In the binary component system, MB and AU exhibit compe...

in this study, nano-tio2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. the effects of ph, initial chloroform concentration and nano-tio2 dosage were also investigated. optimal conditions for chloroform removal by nano-tio2 have been then identified. results of equilibrium experiments showed that the...

AlMCM-41 was applied for adsorption of methylene blue (MB) and auramine (AU) in single and binary component systems. In the single component systems, AlMCM-41 represents higher adsorption capacity for MB than AU with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚C for MB and AU, respectively. In the binary component system, MB and AU exhibit compe...