in this study, the isothermal reduction of iron oxide pellets, made of iranian chadormalo, gole-gohar, and sangan iron ores, was investigated in the temperature range of 900-1100°c. tabas, pabdana, babnizoo, karmozd, and shahrood domestic coals were used as reductants. parametric studies were performed and the effects of such factors as temperature, average particle size of iron ore and coal fi...

Iron ores are used in blast furnace for the production of pig iron; AGBAJA Iron ore has an estimated reserve of over I billion metric tonnes. Unfortunately, this large reserve cannot be utilized for the production of pig iron due to its high sulphur contents. This work studied the reduction of sulphur content of AGBAJA iron ore. Acid leaching methods were used to reduce sulphur contents of the ...

Conventional gravity separation process of iron mineral fines is not very effective. In present work Multi Gravity Separation (MGS) process has been studied. This study was performed on a low-grade iron ore namely goethiticlateritic ore (GLO) from Eastern India. Detailed mineralogical, physical and chemical characteristics of a goethiticlateritic iron ore showed that the sample contained porous...

Iron ore pellets are made from refined and ground ore that is balled into spheroids and then heat treated. Pellet properties are measured through standardized physical, chemical and metallurgical tests to guarantee a high quality end product. However to better understand the oxidation and sintering of iron ore pellets one has to study the microstructures. This paper provides a proof of concept ...

The iron content of the ore used is crucial for the productivity and coke consumption rate in blast furnace pig iron production. Therefore, most iron ore deposits are processed in beneficiation plants to increase the iron content and remove impurities. In several comminution stages, the particle size of the ore is reduced to ensure that the iron oxides are physically liberated from the gangue. ...

J. Korol, Central Mining Institute, Department of Material Engineering, Poland D. Burchart-Korol, A. Smoliński, Central Mining Institute, Department of Energy Saving and Air Protection, Poland In this study composition of sinter mixtures used in Polish sinter plants were established. Seven sinter mixtures composition were examined, based on iron-bearing materials, admixtures and fuels.

Alumina-rich iron ore is a widely existed polymetallic deposit in the nature, and it has a high comprehensive utilization value. Because the alumina and iron contents of alumina-rich iron ore vary from each other, there are many different measures and processes to recover iron and alumina from the various kinds of alumina-rich iron ore. In the blast furnace (BF) ironmaking process, the alumina ...

ABSTRACT:Iron ore is the main mineral resources to support China's national economy, and open-pit mining is the main way. Chemical analysis has its disadvantages in terms of the determination of iron-ore type, such as slow speed and high cost. Therefore this study has put forward a method to determine iron-ore type through field spectrum analysis. First various types of iron-ore samples were co...

Investigations on the chemical and microbial leaching of a Nigerian Iron-ore in sulphuric acid have been carried out. The influence of physico-chemical parameters such as acid concentration, temperature, particle size and stirring speed on the chemical dissolution of the ore was investigated. The dissolution rates are significantly influenced by the temperature and acid concentration while the ...