Highly stable sulfur/microporous carbon (S/MC) composites are prepared by vacuum infusion of sulfur vapor into microporous carbon at 600 °C, and lithium sulfide/microporous carbon (Li2S/MC) cathodes are fabricated via a novel and facile in situ lithiation strategy, i.e., spraying commercial stabilized lithium metal powder (SLMP) onto a prepared S/MC film cathode prior to the routine compressing...

Hybrid materials using a macroporous sponge and spherical microporous adsorbents have been developed for an effective rapid pretreatment of water samples. Various adsorbents, including methacrylate series, divinylbenzene (DVB), and graphite particles, were utilized for hybridization with a macroporous sponge consisting of polyethylene and polyvinyl acetate, EVA resin. Both the EVA resin and eac...

In present study, molecular dynamics simulation of Cadmium (II), Lead (II) and Copper (II) removal from aqueous electrolyte solutions using the ion-exchange process with the zeolite particles was done. The results showed that, most of the particles had the highest affinity of ion exchanging with Lead (II) and the lowest affinity with Copper (II). The calculated mean ion-exchange ratios showed t...

Microporous carbons were prepared starting from a series of benzene polycarboxylic acids following two strategies: (i) activation- and template-free pyrolysis (ii) ion-exchange pyrolysis. The proposed synthetic strategies are facile approaches to produce highly microporous that avoid the use large amounts corrosive expensive chemical activators or templates. By varying number carboxylic acid gr...

Lithium ion batteries have proven themselves the main choice of power sources for portable electronics. Besides consumer electronics, lithium ion batteries are also growing in popularity for military, electric vehicle, and aerospace applications. The present review attempts to summarize the knowledge about some selected membranes in lithium ion batteries. Based on the type of electrolyte used, ...

Background: In this study we have prepared the IgA solution from normal human plasma using plasma fractionation and ion exchange chromatography. Materials and Methods: Using fractionation of plasma with cold ethanol (starting with 8% ethanol), fraction III was prepared as a suitable source for IgA preparation. Then it was treated with caprylic acid for separation of impurities. For enrichm...

The use of mixed selective solvents provides an effective means to control self-assembly of the all-conjugated diblock copolymer poly(3-butylthiophene)-b-poly(3-hexylthiophene) (P3BHT) into nanostructured morphologies. The solvent and temperature effects on the self-assembly of P3BHT during cooling and subsequent crystallization were explored for the first time. Depending on the poor/good solve...

the major foible of dental ceramics is their brittle nature. therefore, the producers of these materials have focused on the “strength” issue. a method of increasing strength is ion exchange on porcelain surface which leads to formation of a compressive crust that opposing forces should overcome before developing a crack. in current study, ion exchange in two types of porcelain, ceramco ii whic...

Membrane parameters characteristic for the study of electrolyte solutions across microporous membranes such as salt permeability, ion transport numbers and membrane electrical resistance have been determined for a ceramic microfiltration membrane by measuring salt diffusion, membrane potential and impedance spectroscopy (IS), respectively. In order to see the effect of ion charge and concentrat...