Medium-density fiberboards of acceptable quality were made from a mixture of barky chips from 14 southern hardwoods. Boards made from fiber refined at three different plate clearances did not vary significantly in bending, internal bond (IB), or linear expansion. But, lack of replications and the fact that the refiner was not loaded to capacity caused these results to be inconclusive. Increasin...

Asialoglycoprotein Ib and asialoglycocalicin have been isolated from the membranes and from the supernatant, respectively, after sonication of neuraminidase-treated platelets, by lectin affinity chromatography on peanut agglutinin. The isolated asialoglycoprotein Ib had an apparent molecular weight of 160,000 when not reduced and 150,000 when reduced, whereas the asialoglycocalicin had an appar...

This study examined possible feasibility of canola (Brassica napus) straws in the production of particleboard. Three-layer experimental particleboards with density 0,7 g/cm3 were manufactured using different canola straws particle ratios (0%, 25%, 50%, 75% and 100%) and urea formaldehyde (UF) adhesive. Modulus of elasticity (MOE), modulus of rupture (MOR), internal bond strength (IB), water abs...

Tannin extracts were prepared from barks of maritime pine (Pinus maritimus), aleppo pine (Pinus halepensis), Norway spruce (Picea abies) and from a mixture of barks of different pine species (Pinus spp., namely 20% black pine (Pinus thunbergii)+ 30% Scots pine (Pinus sylvestris) + 20% maritime pine (Pinus maritimus) + 10% Aleppo Pine (Pinus halepensis) + 5% Douglas fir (Pseudotsuga menziesii) +...

Research results are presented for two studies which use the common statistical method of decision trees. First, regression trees of the internal bond (IB) of 0.750” medium density fiberboard (MDF) identified significant regressors (α < 0.05) as “refiner steam pressure” which interacts with “press start control” and “dry fuel bin speed.” The highest IB (mean = 151 psi) occurred with “refiner st...

Recovery of chromated copper arsenate (CCA)-treated wood for reuse has been the focus of several international research groups due to the imminent disposal problem created when large quantities of CCA-treated wood ultimately come out of service. Bioleaching with Bacillus licheniformis CC01 and oxalic acid extraction are two methods known to remove significant quantities of metals from CCA-treat...

in this study, the particleboard was made with rice husk and urea formaldehyde resin of 7, 8, 9 and 10 percent (based on dry weight of rice husk). to improve mechanism of bondability a definite amount of isocyanate resin is introduced to replace the same amount of urea formaldehyde resin. the effect of urea formaldehyde resin and diisocyanate content on bondability was evaluated by studying the...

in this study, rice husk and sodium silicate solution were used to produce particleboards. sodium silicate was used as bonding aid by 25, 20, 15, 10, 5 and zero percent (based on rice husk dry weight). to modify the mechanism of bondability, one percent of 4,4’-diphenylmethane diisocyanate (mdi) was added for every five percent less sodium silicate solution. the effect of diisocyanate on bondab...

The mode I fracture toughness as a function of crack length of medium density fiberboard (MDF), particle board (PB), and Douglas-fir (DF) were all measured using a new energy-based method. PB and MDF are examples of composites that develop fiber bridging during crack propagation, which causes their toughness to increase with crack length. Longitudinal cracks in DF also displayed fiber bridging ...