The growth kinetics of intermetallic compound layers formed between eutectic Sn–58Bi solder and (Cu, electroless Ni–P/Cu) substrate were investigated at temperature between 70 and 120◦C for 1 to 60 days. The layer growth of intermetallic compound in the couple of the Sn–58Bi/Cu and Sn–58Bi/electroless Ni–P system satisfied the parabolic law at given temperature range. As a whole, because the va...

Here we present digestive ripening facilitated interatomic diffusion for the phase controlled synthesis of homogeneous intermetallic nanocrystals of Au-Sn system. Au and Sn metal nanoparticles synthesized by a solvated metal atom dispersion (SMAD) method are employed as precursors for the fabrication of AuSn and Au5Sn which are Au-rich Au-Sn intermetallic nanocrystals. By optimizing the stoichi...

P. Pokorny, J. Kolisko, L. Balik – Czech Technical University – Klokner Institute, Prague, Czech Republic P. Novak – Institute of Chemical Technology, Prague, Czech Republic This review article mainly describes the composition of intermetallic Fe Zn, i.e. zeta (ζ), delta (δ1k + δ1p), gamma1 (Γ1) and gamma (Γ) on galvanized steel during low temperature galvanization (t ~ 450 °C). It gives detail...

This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-sc...

A diffuse-interface model of reactive wetting with intermetallic formation is presented. The model incorporates fluid flow, solute diffusion, and phase change that are based on the total molar Gibbs energy of a ternary system with four phases. Numerical simulations were performed successfully revealing the complex behavior of the reactive wetting process that include nucleation and growth of an...

This study investigates the formation of a chromate conversion coating at Al-Cu-Fe-Mn intermetallic sites of an Al2219 alloy and the corrosion initiation at these sites in a 3.5 % NaCl solution, using SEM, AES and EDX. Changes in the surface chemistry were monitored after progressive exposures to the solution up to 42 hours. The coating was found to be thinner and more defective on the intermet...

The Cottrell-Stokes two-stage straining of fcc metals and intermetallic compounds whose yield stress exhibits an anomalous temperature dependence is analyzed theoretically. The magnitude of stress jumps brought about by changes in temperature is expressed via characteristics of dislocation transformations to shortand long-lived barriers. The manner in which the thermally activated blocking of d...

In the present study, friction spot welding or refill friction stir spot welding was performed to consolidate dissimilar AA5754 Al and AZ31 Mg alloys. The intermetallic compounds of Al12Mg17 and Al3Mg2 were primarily found in the weld, distributed at the interface between the base materials and in the Al top sheet. The distribution of the intermetallic compounds and the interfacial area between...

Sn–9Zn solder joints containing Ag nano particles were prepared by mechanically mixing Ag nano particles (0.3, 0.5 and 1 wt%) with Sn–9Zn solder paste. In the monolithic Sn–Zn solder joints, scallop-shaped AuZn3 intermetallic compound layers were found at their interfaces. However, after the addition of Ag nano particles, an additional uniform AgZn3 intermetallic compound layer well adhered to ...

Citation: Salerno M, Stępniowski WJ, Cieślak G, Norek M, MichalskaDomańska M, Karczewski K, Chilimoniuk P, Polkowski W, Jóźwik P and Bojar Z (2016) Advanced Image Analysis of the Surface Pattern Emerging in Ni3Al Intermetallic Alloys on Anodization. Front. Mater. 3:34. doi: 10.3389/fmats.2016.00034 advanced image analysis of the surface Pattern emerging in ni3al intermetallic alloys on anodization