since the pressure of hydrocarbon reservoirs drops due to production, in order to keep the production rate constant or increase enhanced recovery, few methods are used. one of which is gas injection to the reservoir. on the other hand, due to reduction in oil production potential of aghajari oil field, gas injection is highly required to pressurize and enhance oil recovery. there is a possibili...

experiments were conducted to evaluate the performance of a low heat rejection (lhr) diesel engine. performance parameters and emission levels were determined at various magnitudes of brake mean effective pressure. combustion characteristics of the engine were measured with tdc (top dead centre) encoder, pressure transducer, console and special pressure-crank angle software package at peak load...

The objective of this paper is to investigate the effect of fuel injection pressure on power performance and fuel consumption of diesel engine. In a diesel engine, fuel injection pressure is an important aspect of the engines’ power performance in order to obtain combustion treatment. The experiments in this paper are performed on a four-cylinder two-stroke direct injection diesel engine. The d...

The one dimension computational model of a sequential injection engine, which runs on compressed natural gas (CNG) with spark ignition, is developed for this study, to simulate the performance of gas flow pressure profile, under various speed conditions. The computational model is used to simulate and study of the steady state and transient processes of the intake manifold. The sequential injec...

introduction nowadays, due to higher environmental pollution and decreasing fossil fuels many countries make decisions to use renewable fuels and restrict using of fossil fuels. renewable fuels generally produce from biological sources. biodiesel is an alternative diesel fuel derived from the transesterification of vegetable oils, animal fats, or waste frying oils. considering the differences be...

investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (lhr) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].the engine had different operating conditions...

carbon dioxide flooding is considered to be one of the most effective enhanced oil recovery methods for the light oil reservoirs. depending on the operating pressure, the process might be miscible or immiscible. minimum miscibility pressure (mmp) is the most important parameter for assessing the applicability of any miscible gas flood for an oil reservoir. the miscibility condition is determine...

Plastic injection is a method in which, with using an extruder in granules, plastic is injected in a hole with high pressure. Because of meeting the two flow fronts in this process welding line will be made. Along the welding line the strength of produced part is low; therefore the position of welding line and its clarity are very important. In this paper, analyzes have been done with Fluent an...