Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...

This paper describes the relationships between ultra-violet emission, ozone generation and CrVI production in MIG welding which were measured as a function of shield gas flow rate, welding voltage, electrode stick-out and shield gas composition using an automatic welding rig that permitted MIG welding under reproducible conditions. The experimental results are interpreted in terms of the physic...

The aim of this study is to investigate the optimization process parameters for Metal inert gas welding (MIG). In the present work, bead-on -plate welds were carried out on MS 5986 Fe 410 carbon steel sheets using Gas Metal Arc Welding (GMAW) process. In this present investigation ER70S-6 solid wire having 1.2 mm diameter was used as an electrode with direct current electrode positive polarity....

Metals in particulate matter (PM) are considered a driving factor for many pathologies. Despite the hazards associated with particulate metals, personal exposures for at-risk workers are rarely assessed due to the cost and effort associated with monitoring. As a result, routine exposure assessments are performed for only a small fraction of the exposed workforce. The objective of this research ...

Tungsten Inert Gas welding (TIG) process is an important component in many industrial operations. The TIG welding parameters are the most important factors affecting the quality, productivity and cost of welding. This paper presents the influence of welding parameters like welding current, welding speed on strength of low carbon steel on AA1050 material during welding. A plan of experiments bas...

This paper is focused on the study and the control of a deposition process of robotic arc welding. The process consists of a SMD (Shaped Metal Deposition) system, that is a novel rapid prototyping tungsten inert gas (TIG) welding technique leading to near-net-shape, using a layer by layer deposition technique. An experimental setup has been properly implemented in order to study the system and ...

The review focused on the applications of tungsten inert gas a (TIG) metal (MIG) welding processes. Each process was critical studied to understand operations and need maintain safety reliable weld with adequate mechanical properties. In addition, various in aerospace, aeronautic, automotive food packaging industries were critically highlighted. However, there potentials as well problems highli...

A new generation of arc welder has recently become widely available at a price which is within reach of most amateurs and part-time mechanics, known as the MIG welder (metal-arc inert gas welder). In MIG welding the arc is ensheathed in a stream of inert gas which prevents the molten metal from oxidising. The stream of gas changes the character of the emitted radiation, and it is possible that ...

Friction stir welding is used as a solid state joining process for soft materials such as aluminium alloys and also for hard materials like steels. It avoids many of the common problems obtained in fusion welding. In mechanical, civil, automobile, naval, and aeronautical engineering beams are widely used of the magnesium alloys for different applications and that are joined by conventional iner...

This paper addresses the weld joint strength monitoring in pulsed metal inert gas welding (PMIGW) process. Response surface methodology is applied to perform welding experiments. A multilayer neural network model has been developed to predict the ultimate tensile stress (UTS) of welded plates. Six process parameters, namely pulse voltage, back-ground voltage, pulse duration, pulse frequency, wi...