this paper investigated the effects of combining fibers with self-consolidating concrete (scc). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (pps) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. all plans were subjected to fresh concrete tests. for mechanical behavior of...

in this research, the influence of adding micro- and nano- sized calcium carbonate powders to nylon-66 was investigated. mechanical properties of micro and nano- composites, including tensile strength, elongation, and young’s modulus, before and after ageing, were determined and analyzed. for this purpose, micro- and nano-sized caco3 particles were used as fillers to prepare micro-composites (c...

the marble slurry wastes (msw) produced by marble industry is left unattended in theenvironment which causes serious environmental problems. in order to evaluate its potential usage in normal1:2:4 concrete, this study was designed, where the partial replacement of cement with msw was examined.replacement of cement with msw from 0 to 100%, and also its usage as an additive material 10% and 20% b...

The predictability of masonry arch bridges and their behaviour is widely considered doubtful due to the lack of knowledge about the conditions of a given masonry arch bridge. The assessment methods for masonry arch bridges are MEXE, ARCHIE, RING and Frame Analysis Method. The material properties of the masonry and fill material are extremely difficult to determine accurately. Consequently, it i...

Freezing-thawing resistance is a very significant characteristic for concrete in severe environment (such as cold region with the lowest temperature below 0°C). In this study, ordinary-air-entrained (O-A-E) concrete was produced in a laboratory environment; the compressive strength, cubic compressive strength of C50, C40, C30, C25, and C20 ordinary-air-entrained concrete, tensile strength, and ...

Tensile strength is one of the important strength parameters of concrete. Indirect methods have been used up till now for its measurement. These methods though widely accepted, do not furnish the true tensile strength of concrete. This paper presents a new approach for the experimental determination of true tensile strength of concrete. Results obtained by this test are quite encouraging and sh...

The tensile strength of rocks plays a noteworthy role in their failure mechanism, and its determination can be beneficial in optimizing the design of the rock structures. Schistose rocks due to their inherent anisotropy in different foliation directions show a diverse strength at each direction. The purpose of this work was to compare and assess the tensile strength of phyllite, which was obtai...