Quenching cooling rate of rotary hollow cylinder by one row of water impinging jets has been experimentally studied. Water jets (d = 8 mm) with sub-cooling 55 to 85 ◦C and Reynolds number 8,006 to 36,738 impinged over rotary hot hollow cylinder (rotation speed 10 to 70 rpm) with initial temperature 250 to 600 ◦C. Impingement impact angle of row of jets varied between 0 to 135 ◦ and jet-to-jet s...

Impinging jets are used in various in cooling and drying technique. The current research the means of improving the heat transfer for con minimum distance of the nozzle to the impingem impingement heat transfer is described using nume a wide range of parameters for an array of p parameters include varying jet flow speed, width o of nozzle, angle of the jet flow, velocity and impingement surface...

This study investigates the effects of cutting parameters on surface roughness (Raμm ), cutting temperature (T0C) at the chip tool interface and the material removal rate (MRR mm3/min) during hard machining of AISI 1015 (43 HRC) steel using carbide insert under dry and spray impingement cooling environment. A combined technique using orthogonal array and analysis of variance (ANOVA) was employe...

Abstract The aim of this paper is to optimize turbine blade cooling channels by applying jet impingement Method. selection experiment data for NASA 3CX blade, and 3D model using solidworks software create computational fluid dynamics (CFD) simulations used the coolant flow temperature distribution in vane, while experimental testing can validate CFD results provide additional insights into syst...

Experiments were performed to investigate the two-phase cooling characteristics of a new hybrid cooling scheme combining the cooling attributes of slot jets and micro-channel flow. A test module was constructed in which dielectric PF-5052 liquid was introduced through five 0.48 mm wide and 12.7 mm long slot jets, each leading to a 1.59 mm wide and 1.02 mm deep channel. Increases in flow rate an...

Numerical simulations of a three-dimensional model of impingement and film cooling on a flat plate are presented and validated with the available experimental data. Four different turbulence models were utilized for simulation, in which SST  had the highest precision, resulting in less than 4% maximum error in temperature estimation. A simplified geometry with periodic boundary conditions is de...

This paper explores the recent research developments in high-heat-flux thermal management. Cooling schemes such as pool boiling, detachable heat sinks, channel flow boiling, microchannel and mini-channel heat sinks, jet-impingement, and sprays, are discussed and compared relative to heat dissipation potential, reliability, and packaging concerns. It is demonstrated that, while different cooling...

This study presents an experimental investigation of a single droplet with different impingement velocity impinge on the hydrophilic and superhydrophobic substrates under normal and icing temperature by using high-speed image and infrared image techniques. The aim is to better understand the unsteady heat transfer and transient icing process of the aircraft icing caused by the supercooled large...

A numerical and experimental investigation was conducted to analyze dropwise evaporative cooling of heated surfaces with various wettability characteristics. The surface wettability was tuned by nanostructure modifications. Spray-cooling experiments on these surfaces show that surfaces with better wettability have better heat transfer rate and higher critical heat flux (CHF). Single droplet imp...