Acetic acid (HOAc) was selected as a bio-oil model compound for the steam reforming of bio-oil for hydrogen production. The influence of temperature and steam-to-carbon ratio (S/C) on the steam reforming of HOAc over hydrogen-type Zeolite Socony Mobil-5 (HZSM-5) and the catalyst with added Pd (Pd/HZSM-5) have been investigated in a fixedbed reactor. Brunauer–Emmett–Teller surface area measureme...

The objective of this study was to evaluate phenolic compounds produced from the catalytic pyrolysis of pine sawdust by commercial catalysts. Eight types of commercial catalysts consisting of SiO2, montmorillonite, α-Fe2O3, HZSM-5 (Si:Al = 25:1), ZnO, γ-Fe2O3, HZSM-5 (Si:Al = 50:1), and nanoHZSM-5 (Si:Al = 50:1) were screened in a fixed bed reactor at a reaction temperature of 500 °C and a vapo...

The influence of the amount of alumina binders on the catalytic performance of Ni/HZSM-5 for hydrodeoxygenation of cyclohexanone was investigated in a fixed-bed reactor. N2 sorption, X-ray diffraction, H2-chemisorption and temperature-programmed desorption of ammonia were used to characterize the catalysts. It can be observed that the Ni/HZSM-5 catalyst bound with 30 wt.% alumina binder exhibit...

This paper deals with maximizing dimethyl ether (DME) production from methanol due to its industrial importance as a future diesel fuel. The high acidity and the micro-porous structure of the catalysts encouraged this reaction. Catalysts containg 6% CuO supported on H-ZSM-5 and H-MOR zeolites give high activities for DME production. The 6% CuO/HMOR is more selective for DME production, while th...

Three kinds of HZSM-5 nanoparticles with different acidity were tailored by impregnating MgO or varying Si/Al ratios. Both the textural and acidic properties of the as-prepared nanoparticles were characterized by nitrogen adsorption-desorption measurements, X-ray diffraction (XRD), scanning electron microscopy (SEM), ammonia temperature-programmed desorption (NH3-TPD) and Fourier transform infr...

The alkylation of benzene by propane to yield isopropylbenzene (iPrPh) was studied using bifunctional Pd-acid catalysts, such as Pd-heteropoly acid and Pd-zeolite, in a fixed bed reactor at 300 ◦C and 1 bar pressure. Keggin-type tungstosilicic acid H4SiW12O40 (HSiW) and zeolite HZSM-5 were used as the acid components in these catalysts. The reaction occurred most efficiently over 2%Pd/25%HSiW/S...

This study investigates the stability and activity of HZSM-5 doped with metals such as molybdenum, nickel, copper, and iron under hydrothermal conditions used for the direct liquefaction of microalgae. Catalysts have been prepared by ion-exchange techniques, and MoZSM-5 was also prepared by wet incipient impregnation for comparison. Hydrothermal liquefaction is considered a potential route to c...

The formation of carbonaceous deposits (coke) in zeolite pores during catalysis leads to temporary deactivation of catalyst, necessitating regeneration steps, affecting throughput, and resulting in partial permanent loss of catalytic efficiency. Yet, even to date, the coke molecule distribution is quite challenging to study with high spatial resolution from surface to bulk of the catalyst parti...