This work describes the optimization of cryogenic treatment (CT) parameters such as the cooling rate, the soaking temperature, the soaking time, the tempering temperature and the tempering time to maximise the tool wear of high speed steel tools in dry turning of AISI 316 grade austenitic stainless steels by Taguchi method. For this purpose, four iteration of Taguchi design (L16) have been used...

The turning process is one of the machining processes for producing machine components. Where lathe included in that uses a chisel. quality cut surface depends on cutting conditions, example low with large feed and depth will result rough so on. This study aims to determine what effect angle length use chisel, where chisel used an HSS In this using experimental research methods aim knowing time...

Nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. Since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. To reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...

AA 6061 has gathered wide acceptance in the fabrication of the light structures required to high strength. Compared to the fusion welding processes that are used for joining structural aluminium alloys, friction stir welding (FSW) process is an emerging solid state joining process in which the material that is being welded does not melt and recast. In this experimental work, an extensive invest...

High-strength steels (HSS) are produced using special chemical composition or/and manufacturing processes. Both aspects affect their mechanical properties at elevated temperatures and after cooling down, and particularly the residual strength and the ductility of the structural members. As HSS equates the design of lighter structural elements, higher temperatures are developed internally compar...

During the past decade, polymer nanocomposites have emerged relatively as a new and rapidly developing class of composite materials and attracted considerable investment in research and development worldwide.Direct machining of polymers can be an option for personalized products and for manufacturing product samples. To obtain high quality products and reduce machining costs, it is very importa...

Drilling is one of the most useful metal cutting processes and is used in various applications, such as aerospace, electronics, and automotive. In traditional drilling methods, the thrust force, torque, tolerance, and tribology (surface roughness) are related to the cutting condition and tool geometry. In this paper, the effects of a pre-center drill hole, tool material, and drilling strategy (...

Abstract M42 high-speed steel (W 2 Mo 9 Cr 4 VCo 8 ) is a kind of high cobalt super-hard (HSS), which extensively used in various cutting tool materials, but because the price cobalt, HSS does not bring good economic benefits. In this thesis, consequences contents (0.0%, 2.0%, 4.0%, 6.0%, 8.0%) on organization and mechanical properties have been studied. The microstructure was analyzed by OM, S...

During the past decade, polymer nanocomposites have emerged relatively as a new and rapidly developing class of composite materials and attracted considerable investment in research and development worldwide.Direct machining of polymers can be an option for personalized products and for manufacturing product samples. To obtain high quality products and reduce machining costs, it is very importa...

during the past decade, polymer nanocomposites have emerged relatively as a new and rapidly developing class of composite materials and attracted considerable investment in research and development worldwide.direct machining of polymers can be an option for personalized products and for manufacturing product samples. to obtain high quality products and reduce machining costs, it is very importa...