batch adsorption experiments were performed to study adsorption potential of agricultural residues viz. rice straw, wheat straw and salvinia plant biomass for removal of heavy metals such as cr, ni, and cd. plant materials were used in different combinations. heavy metal removal efficiency was more at low metal concentration (35 mg/l). salvinia biomass possessed higher efficiency for removing h...

introduction: sequential batch reactor (sbr) is one of the modified biological treatment systems which is able to remove bod5, nitrogen, and phosphorus from wastewater. the object of this study is to determine the removal efficiency of nitrogen, phosphorus, and heavy metals from municipal wastewater by the advanced sbr system. methods: this descriptive-analytical and cross-sectional study was c...

Introduction: Sequential batch reactor (SBR) is one of the modified biological treatment systems which is able to remove BOD5, Nitrogen, and phosphorus from wastewater. The object of this study is to determine the removal efficiency of nitrogen, phosphorus, and heavy metals from municipal wastewater by the advanced SBR system. Materials and Methods: This descriptive-analytical and cross-sectio...

background: industrial development has caused the release of various pollutants including heavy metals into the environment. these toxic compounds are extremely dangerous to living beings and the environment due to their non-biodegradability, severe toxicity, carcinogenicity, the ability to be accumulated in nature and the ability to contaminate groundwater and surface water. the aim of the pre...

Copper and hexavalent chromium are heavy metals that are harmful to human health. Natural adsorbent chitosan, due to its considerable properties such as the presence of functional groups of –NH2 and -OH, non-toxicity, low cost, and biocompatibility, has gained much attention in pollutant removal. Therefore, in the present study, adsorption of chromium (VI) and copper (II) ions was conducted in ...

Background: Industrial development has caused the release of various pollutants including heavy metals into the environment. These toxic compounds are extremely dangerous to living beings and the environment due to their non-biodegradability, severe toxicity, carcinogenicity, the ability to be accumulated in nature and the ability to contaminate groundwater and surface water. The aim of the pre...

heavy metal removal from water and wastewater was investigated by using raw and modified diatomite from Iranian mines. Modification of diatomite was done by impregnating the diatomite surface with 0.35 g of manganese oxide in one gram of diatomite. This modified diatomite was named Mn-Diatomite. The surface area measurements for Mn-diatomite showed a 2.2 fold increase, hence higher removal capa...

the pollution of water environments is a challenging issue especially in developing countries. contamination of drinking water with heavy metals has been reported in many parts of the world. arsenic, chromium and lead are dangerous heavy metals and also common contaminants of drinking water. in this study, the capacity and performance of the surfactant-modified sabzevar natural nanozeolite (sms...

background: considering the toxic effects of heavy metals and microbial pathogens in industrial wastewaters, it is necessary to treat metal and microbial contaminated wastewater prior to disposal in the environment. the purpose of this study is to assess the removal of heavy metals pollution and microbial contamination from a mixture of municipal and industrial wastewater using membrane bioreac...

ajor emphasis is placed today on treating plating solutions and rinsewater to reduce the concentration of toxic metals to below established limits prior to discharge or water reuse. Available technology is adequate for partial treatment of most wastewater; however, new technology is needed to scavenge heavy metals from complexed or chelated compounds in rinsewater. Several report^^-'^ from this...