The paper provides a critical appraisal of the events surrounding the unexpected settlement of large-diameter monopile foundations for offshore wind energy converters, and will detail experimentation that is to be undertaken to determine the extent of the wear failure mode in such structures. The potential for wear deterioration at the grout-steel interface has been caused by the lack of axial ...

Pull-out experiments were performed on three carbon fiber-reinforced polymer (CFRP) ground anchors simulating their applications in different rock types which provided different confinement levels. The CFRP tendons comprised, on the ground side, a prefabricated conical anchor body of high-strength grout in which two CFRP straps were embedded. The anchors reached an average load-bearing capacity...

Synopsis An anchorage test programme carried out on the site of deep basement construction in Norwich, UK, allowed determination of anchorage capacities, creep characteristic data and the exhumation of several anchor bodies in chalk. This paper reports on the performance of the chalk based anchorages, the observation of exhumed grout body shapes and sizes, extent of grout penetration into disso...

Semi-flexible pavement surfacing is a composite pavement that utilizes the porous pavement structure of the flexible bituminous pavement, which is subsequently grouted with appropriate cementitious materials. This study aims to investigate the compressive strength, flexural strength, and workability performance of cementitious grout. The grout mixtures are designed to achieve high strength and ...

The effectiveness of silica sol grout on mudstones is reported in this paper. Using X-ray diffraction (XRD), the study investigates how the silica sol grout modifies mudstone mineralogy. Micropore sizes and mechanical properties of the mudstone before and after grouting with four different materials were determined with a surface area/porosity analyser and by uniaxial compression. Tests show th...

A post-tensioning tendon duct filled with grout can effectively prevent corrosion of the reinforcement, maintain bonding behavior between the reinforcement and concrete, and enhance the load bearing capacity of concrete structures. In practice, grouting of the post-tensioning tendon ducts always causes quality problems, which may reduce structural integrity and service life, and even cause acci...

The greatest stability of in vitro plant materials with practical storage periods measured in decades can be achieved by cryogenic storage at ultra low temperatures. Liquid Nitrogen (LN) is the most common medium for cryostorage as it is relatively inexpensive and readily available (Withers, 1987; Panis and Lambardi, 2005). This process puts the cells in suspended animation where they can retai...

Synchrotron X-rays have been used to study the oxidation of uranium and uranium hydride when encapsulated in grout and stored in de-ionised water for 10 months. Periodic synchrotron X-ray tomography and X-ray powder diffraction have allowed measurement and identification of the arising corrosion products and the rates of corrosion. The oxidation rates of the uranium metal and uranium hydride we...

this study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using universal distinct element code (udec). the numerical model is validated using practical data and analytical method for grouting process. input data for the modeling, including geomechanical parameters along with grout properties, were obtained from a case study. the...

Acid mine drainage (AMD) from abandoned coal mines continues to be one of the most significant environmental problems. Remediation of AMD requires an addition of lime source to decrease the acidity, and grouting the entire mine and encapsulating the pyrite by calcium-rich additives is often employed. Utilization of alkaline coal combustion by-products (CCBs) has gained acceptance in such remedi...