This study concerns improvement of flexural stiffness/strength of concrete members reinforced with externally bonded, aluminum-glass fiber composite (AGC) beams. An experimental program, consisting of seven reinforced concrete slabs and seven reinforced concrete beams strengthened in flexure with AGC beams, was initiated under four-point bending in order to evaluate three parameters: the cross-...

The performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. Therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. One common method of improving the performance of asphaltic mixtures is using different types of ...

Fiber reinforced concrete is a composite material consisting of mixtures of cement, fine aggregate, coarse aggregate and fibers. The fiber reinforced concrete exhibits better fatigue strength and increased static and dynamic tensile strength and compressive strength. In this project, the strength of fiber reinforced concrete was investigated partial replacement of cement with rice husk ash and ...

The use of fiber reinforced polymer (FRP) bars in reinforced concrete members enhances corrosion resistance when compared to traditional steel reinforcing bars. Although there is ample research available on the behavior of FRP bars and concrete members reinforced with FRP bars under elevated temperatures (due to fire), there is little published information available on their post-fire residual ...

There is a growing need for the rehabilitation, repair, and upgrading of concrete structures such as bridges and buildings. The repair or rehabilitation of reinforced concrete structures often offers a lower cost alternative to rebuilding, and it is traditionally achieved by bonding steel plates to the tensile face of a reinforced concrete member. The shear strength can be enhanced with plates ...

As part of a larger project to investigate the use of Fiber-Reinforced Polymer (FRP) materials in bridge construction, a short-span FRP-reinforced concrete bridge was installed in central Missouri. The Walters Street Bridge is a precast concrete panel bridge reinforced with both glass FRP (GFRP) and carbon FRP (CFRP) reinforcing bars. It was designed according to the American Concrete Institute...

Concrete is most widely used construction material in the world. Fiber reinforced concrete (FRC) is a concrete in which small and discontinuous fibers are dispersed uniformly. The fibers used in FRC may be of different materials like steel, G.I., carbon, glass, aramid, asbestos, polypropylene, jute etc. The addition of these fibers into concrete mass can dramatically increase the compressive st...

This study evaluated the effect of macro steel fiber (SF), micro glass fiber (GF) and micro polypropylene fiber (PF) in lightweight aggregate concrete, (LWAC) beams reinforced with glass fiber reinforced polymer (GFRP) bars. Firstly, concrete mixtures with different volume fractions of GF, PF and SF were tested up to compressive strength, then determine the optimum fiber content GF, PF and SF a...

Self Compacting concrete (SCC) is a flowing concrete that is able to consolidate under its own weight without any need for vibration. The high fluid nature of SCC makes it suitable for placing it in difficult conditions and in sections with congested reinforcement. Use of SCC overcomes the difficulties pertaining to casting conditions and reduces the man power required. Self compacting concrete...

Glass fiber-reinforced polymer (GFRP) concrete reinforcement exhibits high strength, is lightweight, can decrease time of construction, and is corrosion resistant. However, research has shown that chemical reactions deteriorate the GFRP reinforcing bars over time, resulting in a reduced tensile capacity. This paper develops a time-variant probabilistic model to predict the tensile capacity of G...