Like many developed countries, energy efficiency and environment impact are the most important process in the development of power generation policy in India. A high ambient temperature reduces the air density and makes inlet air cooling (IAC) and steam injection gas turbine (STIG) attractive power augmentation method for existing regenerative gas turbine. With a high back work ratio and a high...

Abstract—There is a gap at combustor-turbine interface where leakage flow comes out to prevent hot gas ingestion into the gas turbine nozzle platform. The leakage flow protects the nozzle endwall surface from the hot gas coming from combustor exit. For controlling flow’s stream, the gap’s geometry is transformed by changing fillet radius size. During the operation, step configuration is occurre...

gas turbines play an important role in supplying power for the country especially in peak electricity load. the main disadvantages are the turbines, they produce large changes are a result of climate change. however, in times of peak electricity grid and at the same time warm months, can produce gas turbines under the effect of ambient temperature, the amount of reduced considerably. the method...

To achieve higher efficiency target of the advanced turbine systems, the closed-loop steam cooling scheme is employed to cool the airfoil. It is proven from the experimental results at laboratory working conditions that injecting mist into steam can significantly augment the heat transfer in the turbine blades with several fundamental studies. The mist cooling technique has to be tested at gas ...

Cooling characteristics are given in terms of the variation of average blade temperature at mid-span with cooling-flow rate, Reynolds number, gas/cooling-air absolute temperature ratio, and, for the rotor, gas-stream incidence. Chordwise and spanwise variations of blade temperature are also presented. Measured pressure-drop characteristics indicate that in a gas-turbine engine, with the cooling...

Mist cooling concept has been considered for cooling turbine airfoils for many years. This concept has been proven experimentally as an effective method to significantly enhance the cooling effectiveness with several fundamental studies in the laboratory under low pressure and temperature conditions. However, it is not certain the same performance can be harnessed in the real gas turbine enviro...

Effective cooling of gas turbine combustor liners, combustor transition pieces, turbine vanes (nozzles) and blades (buckets) is a critical task to protect these components from the flue gas at extremely high temperature. Air film cooling has been successfully used to cool these hot sections for the last half century. However, the net benefits from the traditional methods seem to be marginally i...

Power enhancement technologies for gas turbines such as inlet fogging, interstage water injection, saturation cooling, inlet chillers, and combustor injection are being used by end users without evaluating the potentially negative effects these devices may have on the operational integrity of the gas turbine. Specifically, the effect of these add-on devices, off-design operating conditions, non...

Gas turbine engine efficiency can be increased by the improvements of the cooling air system. In this study, gas turbine preswirl cooling system is computationally analyzed using a validated three-dimensional quasi-steady model. In the first phase of the study, the system is analyzed with respect to different operating conditions, for understanding its behavior. In this part, the dependence of ...