Gas lift valves are widely used in oil production fields to pump recycled gas and nitrogen into the production tubing, to sustain production by aerating the oil and lifting it to the ground or sea surface. Today's industry standard, a pressure-actuated valve, is susceptible to various modes of failure, including corrosion and jamming. Safety mechanisms are needed to seal the valve in case of a ...

Gas-lift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of liquid column. They are widely used in various industrial applications such as oil extracting in petroleum industries. Gas-liquid flow being the main part of the flow through these systems, flowing in vertical pipes of gas-lift pumps has different regimes namely bubbly, slug, chur...

The hyperthermophilic archaeon Thermococcus hydrothermalis was cultivated in continuous culture in a gas-lift bioreactor in the absence of elemental sulphur on both proteinaceous and maltose-containing media. Optimal conditions (pH, temperature and gas flow rate), determined on complex media that yielded maximal growth rate and maximal steady state cell density, were obtained at 80 degrees C, p...

gas-lift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of liquid column. they are widely used in various industrial applications such as oil extracting in petroleum industries. gas-liquid flow being the main part of the flow through these systems, flowing in vertical pipes of gas-lift pumps has different regimes namely bubbly, slug, churn an...

When the natural energy of an oil field is not enough to fluid lift, we need a secondary recovery procedure on the well (normally, this is called artificial lift) [I]. For this case, we can use different techniques such as artificial lift by gas (ALG) [I ] . The idea of the ALG is to inject gas, and in this way to lighten the fluid. The design of this system must be made very carefully. One of ...

The main objective in oil production system using gas lift technique is to obtain the optimum gas injection rate which yields the maximum oil production rate. Relationship between gas injection rate and oil production rate is described by a continuous gas lift performance curve (GLPC). Obtaining the optimum gas injection rate is important because excessive gas injection will reduce production r...

The main objective in oil production system using gas lift technique is to obtain the optimum gas injection rate which yields the maximum oil production rate. Relationship between gas injection rate and oil production rate is described by a continuous gas lift performance curve (GLPC). Obtaining the optimum gas injection rate is important because excessive gas injection will reduce production r...

Gas-lift is one of the most used artificial lift methods worldwide. In Brazil it responds for more than 70% of the total oil production. Gas-lift wells are known to present oscillatory behavior associated with phenomena like heading and density wave. This work presents an innovative way to control these oscillations. The approach adopted controls the well dynamics without fixing any operational...

Pipelines, wellbores and ground installations are permanently controlled by sensors spread across the crucial points in the whole area. One of the most popular techniques to support proper oil drive in a wellbore is a Gas Lift. In this paper we present the concept of using wireless sensor network (WSN) in the oil and gas industry installations. Assuming that Gas Lift Valves (GLVs) in a wellbore...

Killifish, Fundulus heteroclitus, subjected to artificial lift above their center of gravity (10% of body weight) required a minimum of 7-8 days to resorb swimbladder gases completely. The swimbladders of some fish, however, did not fall below 50% of normal volume. The rate of increase in swimbladder volume upon removal of lift varied little among individuals, with approximately 6 days required...