Maximization of the catalyst efficiency in automotive fuel-injection engines requires the design of accurate control systems to keep the air-to-fuel ratio at the optimal stoichiometric value AF . Unfortunately, this task is complex since the air-to-fuel ratio is very sensitive to small perturbations of the engine parameters. Some mechanisms ruling the engine and the combustion process are in fa...

introduction nowadays, due to higher environmental pollution and decreasing fossil fuels many countries make decisions to use renewable fuels and restrict using of fossil fuels. renewable fuels generally produce from biological sources. biodiesel is an alternative diesel fuel derived from the transesterification of vegetable oils, animal fats, or waste frying oils. considering the differences be...

Abstract: In this study, the effect of fuel injection discharge curve and injection pressure simultaneously for upgrading power of heavy duty diesel engine by simulation of combustion process in AVL-Fire software are discussed. Hence, the fuel injection discharge curve was changed from semi-triangular to rectangular which is usual in common rail fuel injection system. Injection pressure with r...

Start of fuel injection and fuel type are two important factors affecting engine performance and exhaust emissions in internal combustion engines. In the present study, a one-dimensional computational fluid dynamics solution with GT-Power software is used to simulate a six-cylinder diesel engine to study the performance and exhaust emissions with different injection timing and alternative fuels...

The design and development of modern internal combustion engines are marked by a reduction in exhaust gas emissions and increase in specific power and torque. Correspondingly, combustion noise excitation and fuel consumption also have to be reduced. These objectives can be achieved through the development of advanced combustion systems, the increased flexibility of fuel injection systems and EC...

This paper presents experimental test results of a new compressed natural gas direct injection (CNG-DI) engine that has been developed from modification of a multi cylinder gasoline port injection (PI) engine. The major modifications done are (1) the injection system has been modified to gas direct injection using new high pressure gas injectors, (2) compression ratio has been changed from 10 t...

An experimental study is performed to investigate the fuel impingement on cylinder walls and piston top inside a directinjection spark-ignition engine with optical access to the cylinder. Three different fuels, namely, E85, E50 and gasoline are used in this work. E85 represents a blend of 85 percent ethanol and 15 percent gasoline by volume. Experiments are performed at different load condition...

Often called 'the heart of the engine', the fuel injection system is without any doubt one of the most important systems. It meters the fuel delivery according to engine requirements, it generates the high injection pressure required for fuel atomization, for air-fuel mixing and for combustion and it contributes to the fuel distribution in the combustion system-hence it significantly affects en...

An accurate fuel injection advance angle is an important parameter to obtain better fuel combustion index and emission index. Fuel injection advance angle is always deranged because of the wear of the injection nozzle matching parts, which has serious impact on diesel engine performance. How to measure the fuel injection advance angle easily and accurately is a problem for fault diagnosis of hi...