Friction welding of cast Fe-40Al alloy was carried out at 1000 rmp for various friction times, friction pressures, and forging pressures. The microstructures of the interface of welded samples were analyzed by optical and scanning electron microscopy (SEM). Micrographs demonstrated that excellent welding formed continuously along the interface, except for samples welded for 3 s. Chemical compos...

N. Ratković, Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia. R. Nikolić, Faculty of Civil Engineering, University of Žilina, Žilina, Slovakia. I. Samardžić, University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia. Fundamental principles of friction welding of dissimilar steels (high speed and tempering steel) from the aspect of metallurgical and che...

MAY 2003 -S 116 ABSTRACT. Mechanical characteristics of resistance spot welding machines, such as stiffness, friction, and moving mass, have complex influences on the resistance welding process and weld quality. In this paper, these influences are systematically investigated through experiments. The mechanisms of the influences are explored by analyzing process signatures, such as welding force...

Friction stir welding does not involve bulk melting of the components that are joined. This has inspired attempts to exploit it for joining materials which differ in properties, chemical composition or structure, and where fusion can lead to detrimental reactions. The purpose of this special issue of Science and Technology of Welding and Joining was to assess the status of friction stir welding...

The purpose of this work was to join and assess the development of solid state joints of dissimilar material AA6082 aluminum alloy and AISI 304 stainless steel, via continuous drive friction welding process, which combines the heat generated from friction between two surfaces and plastic deformation. Tests were conducted with different welding process parameters. The results were analyzed by me...

This thesis presents a process planning methodology for a rapid injection mold tool manufacturing system that involves additive and subtractive techniques, whereby slabs are sequentially bonded and milled using layered tool paths. Mold tools are grown in a bottom up fashion, eliminating the need for multi-axis machining operations (beyond three axes) and allowing small features in deep cavities...

There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...

This paper provides a general introduction to welding fundamentals (section 2) followed by sections on a few selected welding processes that have had significant developments or improvements over the last few years. The processes that are discussed are friction welding (section 3), hot plate welding (section 4), ultrasonic welding (section 5), laser/IR welding (section 6), RF welding (section 7...

The Friction Stir Welding process is now 20 years old and the interest in it and its potential continues to increase dramatically. FSW can be applied to a multitude of products with varying material types and thicknesses. However, a continuous weld is not always required to meet the product performance requirements. Thus, one can consider some form of intermittent weld, such as Friction Stir Sp...