Flotation is a complex process that exhibits high dimensionality which makes modeling and optimization very challenging. One technique to alleviate the problem combine variables together into more informative ones. Bubble surface area flux air recovery are examples of reduction. Gas holdup also captures effect plurality including gas rate, bubble size, surfactant type, concentration. This work ...

Dephosphorization of magnetite fines at LKAB is carried out by floating the phosphorous gangue using a fatty acid based collector namely Atrac and MIBC frother. Excessive and stable froth formation in flotation led to an unnecessary step of diluting the phosphate froth gangue component to transport to tailings damn. In this study the influence of reagents and their combinations on the froth pro...

It is well-known that entrainment of particles into the froth is a key factor in the selectivity and performance of the flotation process, especially for fine particle recovery. Since flotation is a continuous process, in this work, the effects of operating parameters on the entrainment of ash materials in a sample coal flotation is investigated from a time-sequence viewpoint. The effects of th...

an efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. the bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. the box-behnken design (bbd) was employed to design the experiments, to ...

In this work, the effects of the types of frother (MIBC, pine oil, and A65) and operational parameters (impeller speed and air flow rate) on the flotation of quartz coarse particles was investigated using nano bubbles (NBs). Quartz particles of the size of -425+106 mm and three types of frother were used for the flotation experiments. Also the impeller speed was 600 to 1300 rpm, and the air flo...

In this research, cerium recycling was studied by Adsorbing Colloid Flotation (ACF). Ten important parameters including collector type and dosage, cerium and colloid concentrations, frother type, activator type, preparation and frothing time, air flowrate and pH, each in two levels, were investigated. Statistical design of experiment was implemented for process modelling and analysis of var...

Please cite this article in press as: Ogunniy ..., Miner. Eng. (2008), doi:10.1016/j.minen Froth flotation for beneficiation of printed circuit board comminution fines was investigated in this work, via reverse flotation under a scheme described as natural hydrophobic response. With no reagents, the scheme employed variation of kinetic parameters of airflow rate and impeller speed to optimize m...

Flotation is one of the most used methods to upgrade natural graphite resources. However, efficiency usually decreased due entrainment undesirable fine gangue minerals. In this work, impact different factors such as particle size, pulp density, and flotation reagent on mica quartz in a flake was studied. The single mineral results showed increased when reducing size minerals increasing density....

This paper presents the determination of a concentration at the minimum bubble velocity (CMV) for different types of frothers, such as straight and branched alkyl chain aliphatic alcohols, 1,ω-diols, poly(propylene glycol) and poly(ethylene glycol) alkyl ethers, n-alkyltrimethylammonium bromides, commercial frothers and others. The values of terminal rise bubble velocity were reviewed from the ...