The flame stability limit, which was involving the critical flow condition, lift off and blow out, could be affected by the burner geometry in the combustion system installation. Consequently a flame holder should be put in, to hold the flame as big as possible on a stable condition. The flame holder itself, is a device to hold the flame, whereas the flame holder could disturb the air and fuel ...

The purpose of this study is to investigate the effect of radiation heat transfer on temperature distribution and heat flux to the walls of a diesel engine. A diffusion flame is modeled in a simple cylindrical geometry and boundary conditions are defined. A specific solver which can model the turbulent diffusion flame by considering radiation in participating media is used to solve the problem....

Ignition and flame spread above liquid fuels initially below the flashpoint temperature are studied. Opposed air flow to the flame spread due to forced and=or natural convection is considered. Unsteady computations are performed in order to study the ignition event and to describe both uniform and pulsating flame spread. Pools of finite width and length are studied in air channels of prescribed...

The dynamic response of a premixed flame stabilized on a heat-conducting perforated plate depends critically on their coupled thermal interaction. The objective of this paper is to develop an analytical model to capture this coupling. The model predicts the mean flame base standoff distance; the flame base area, curvature and speed; and the burner plate temperature given the operating condition...

• To develop a prototype optical instrumentation system capable of measuring the distributions and fluctuations of temperature and soot concentration of pulverised coal flames. • To evaluate the performance of the system on a 0.5MWth combustion test facility at Innogy plc over a range of combustion conditions. • To establish quantitative relationships between the flame temperature and soot conc...

this paper reports a cfd modeling study to investigate the hydrogen-air mixture combustion in a micro scale chamber. nine species with nineteen reversible reactions were considered in the premixed combustion model. the effect of operational and geometrical conditions including; combustor size, wall conductivity, reactant flow rates and hydrogen feed splitting on combustion stability and outlet ...

Premixed flames encounter gradients of mixture equivalence ratio in stratified charge engines, lean premixed gas-turbine engines, and a variety of other applications. In cases for which the scales—spatial or temporal—of fuel concentration gradients in the reactants are comparable to flame scales, changes in burning rate, flammability limits, and flame structure have been observed. This paper us...