in this study, ultrafine grained 2024 al alloy based b4c particles reinforced composite was produced by mechanical milling and hot extrusion. mechanical milling was used to synthesize the nanostructured al2024 in attrition mill under argon atmosphere up to 50h. a similar process was used to produce al2024-5%wt. b4c composite powder. to produce trimodal composites, milled powders were combined w...

In this paper we focus on an understudied computer vision problem, particularly how the micro-geometry and the reflectance of a surface can be used to infer its material. To this end, we introduce a new, publicly available database for fine-grained material classification, consisting of over 2000 surfaces of fabrics. The database has been collected using a custom-made portable but cheap and eas...

fabrication of ultrafine grained materials by imposing severe plastic deformation for improvement of mechanical and physical properties of metals has been the focus of many researches over the past few years. in this process, a sheet is subjected to repetitive shear deformation conditions by utilizing asymmetrically grooved and flat dies through alternate pressing. in this study, a 2mm thick co...

A microstructure consisting of ultrafine grained (UFG) ferrite with average grain size of ~ 0.7 µm and dispersed nano-sized carbides was produced by cold-rolling and tempering of the martensite starting microstructure in a low carbon steel. Subsequently, fine grained dual phase (DP) steel consisting of equiaxed ferrite grains with average size of ~ 5 µm and martensite islands with average size ...

Coal mines produce large amounts of excavated waste soils, known as spoils. These materials can cover vast areas, are typically dumped in heaps without any treatment, and difficult to exploit for engineering purposes because their significant variability. Efficient exploitation spoil poses challenges, related mainly the involved degree uncertainty. A small number studies have attempted characte...

Mechanism of fatigue crack initiation was investigated in ultrafine-grained (UFG) magnesium alloy AZ91 processed by equal channel angular pressing (ECAP). Fatigue behaviour of UFG material was compared to the behaviour of material in an initial as-cast state. Focused ion beam technique (FIB) was applied to reveal the surface relief and early fatigue cracks. Two substantially different mechanism...

This study focuses on evaluating the unconfined compressive strength (UCS) of improved fine-grained soils. A large database of unconfined compressive strength of clayey soil specimens stabilized with fly ash and blast furnace slag based geopolymer were collected and analyzed. Subsequently, using adaptive neuro fuzzy inference system (ANFIS), a model has been developed to assess the UCS of stabi...

Introduction: Recent work on Wild2 cometary samples shows evidence for sampling of high-T grains that have strong similarities to components in carbonaceous chondrites. Such grains in cometary samples have been used as evidence for large-scale radial mixing in the early Solar System [1,2]. However, Wild2 samples are biased towards relatively coarse-grained material, with finer-grained component...

aisi 304l austenitic stainless steel with different grain sizes of 0.5 -12 μm was obtained through the martensiticprocess. corrosion behavior of different samples was investigated in a 0.5m hcl solution using open circuitpotential, potentiodynamic polarization and electrochemical impedance spectroscopy tests. also, the correlationbetween the grain size and pitting corrosion resistance was asses...

The design of geotextile containers for dewatering applications typically requires good retention of the confined fill material solids. This becomes difficult to achieve when the fill material is fine grained and the pore openings are large. Furthermore, the proper retention becomes critical if the confined material is contaminated. Fly ash is one of the fine-grained geomaterials that exhibit b...