Magnetic field processing is a new promising tool for the structural and functional control of materials. A significant potential exists for tailoring microstructures and impacting kinetics of phase transformation in steels. A high magnetic field modifies the Gibbs free energy. As a result, the phase diagram is shifted upwards so that the Ac1 and Ac3 temperatures increase as the magnetic field ...

We present a method for powering electronic devices from ambient Radio Frequency (RF) signals. Our proposed design of RF energy harvester is made of a compact ferrite rod antenna together with the electronics necessary for converting the received signal into a form that can directly replace batteries. We show that our device can, in principal, power a wireless sensor node from ambient medium wa...

provide a simple electrical equivalent circuit that lends itself to circuit analysis. The magnetic structure shown in Figure 1 will be the first demonstration of this technique. This simple inductor is built upon a ferrite core, with air gaps to store the required inductive energy created by simply shimming the two core halves apart (not usually a good practice, but inexpensive). Purpose: I. To...

The influence of various cations ranging from alkali metals to transition metals according to the periodic table were discussed. The ferrites used were Ni ferrite, Mg ferrite and Zn ferrite having different cation distributions in the spinel lattice. Cations having appropriate ionic radii and valencies are soluble in ferrite. Several additives formed other phase in addition to the spinel phase....

Co-Zn ferrite and BaM ferrite films were deposited on silicon wafer disks with thermally oxidized surface layer without annealing process, and their readlwrite characteristics in contact mode have been investigated by using a MIG and Mn-Zn ferrite head with gap length of 0.2-0.4 pm. The highest linear recording density D50 of Co-Zn ferrite and Ba ferrite films were 105 and 190 WRPI, respectivel...

The reaction mechanism for conversion of MnO nanoparticles to Mn-ferrite nanoparticles was studied, which involved sequential consumption of MnO and the growth of ferrite. The method could be applied to other ferrite nanoparticles including cobalt ferrite.

High strength steels Q690+Q550 were welded using three different welding wires without preheating by gas shielded arc welding process. Microstructural characteristics of weld metals and nucleation mechanism of acicular ferrite were investigated by means of scanning electron microscope (SEM), energy dispersive spectrum (EDS) and transmission electron microscope (TEM). The straight Y-groove test ...

Abstract— This paper develops a method of modelling and designing air-gapped ferrite inductor as filter for large current application of grid-tied inverter. The design method incorporates magnetization curve of the ferrite materials while the modelling of the inductor is based on inverse JilesAtherton model. The dynamic performance of the designed ferrite inductor in the DC-AC inverter circuit ...

We propose a modeling procedure specifically designed for a ferrite inductor excited by a waveform in time domain. We estimate the loss resistance in the core (parameter of the electrical model of the inductor) by means of a Finite Element Method in 2D which leads to significant computational advantages over the 3D model. The methodology is validated for an RM (rectangular modulus) ferrite core...