Locally produced Al–Zn–Mg alloy was subjected to severe plastic deformation through Equal Channel Angular Pressing (ECAP) technique at temperatures of 150 °C and 200 °C. Rectangular thick-walled medium carbon steel die (?c = 450Mpa, ?y 176Mpa) with an L-shaped channel uniform configuration provide the pressing chamber used. Four ECAP passes were imposed consecutively on set samples for temperat...

The precipitation and evolution of microstructure in a spray-cast Al-7034 alloy and a commercial wrought Al-2024 alloy were studied after equal-channel angular pressing (ECAP) using transmission electron microscopy and differential scanning calorimetry (DSC). Microstructural examination showed the grain sizes of both alloys were reduced to the range of ~0.3–0.5 μm through ECAP. The DSC analysis...

Severe plastic deformation (SPD) is one of the processes used to refine the microstructure of materials. Equal Channel Angular Extrusion (ECAE) is the most common method of SPD. In this study, AL-6063grain refinement was performed using the Equal Channel Angular Extrusion method. The material was extruded up to 6 passes at a temperature of 200°C following route A. A suitable die sets equipped w...

Equal channel angular rolling (ECAR) process is one of the methods that have been used to make ultra-fine materials by imposing severe plastic deformation. After repeating the process several times, a large effective strain is applied to the sample that can cause decreasing the grain size and improving the mechanical and physical properties of the metal. In this study, thermal conductivity of t...