in recent years many research works have been carried out on anti-corrosive nanocomposites coatings containing mineral reinforcements. the most important criteria in these attempts are polymerization method and the type of matrix and reinforcement of nanocomposites. in this regard, the physical and mechanical properties of the polymers in which a small amount of filler is used can be improved. ...

A high flux thin-film nanocomposite membrane epoxy/ zeolite NaA nanocomposite films prepared by using ultrasonic mixing and spin coating. The synthesized nanocomposites film was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravity analysis (TGA), and FTIR spectroscopy. Water softener and water flux characteristics of the epoxy/ zeolite NaA nanocomposite ...

Epoxy resin is widely used in high voltage apparatus as insulation. Fillers are often added to epoxy resin to enhance its mechanical, thermal and chemical properties. The addition of fillers can deteriorate electrical performance. With the new development in nanotechnology, it has been widely anticipated that the combination of nanoparticles with traditional resin systems may create nanocomposi...

The epoxy coatings containing multi-walled carbon nanotube/ poly ortho aminophenol nanocomposite were prepared and used as anticorrosive coatings. The nanocomposites with different contents of carbon nanotube were synthesized in a solution of sodium dodecyl sulfate and ammonium peroxy disulfate as a surfactant and an oxidant, respectively. The morphology and structural properties were confirmed...

Common dispersion methods such as ultrasonic sonication, planetary centrifugal mixing and magnetic dispersion have been used extensively to achieve moderate exfoliation of nanoparticles in polymer matrix. In this study, the effect of adding three roll milling to these three dispersion methods for nanoclay dispersion into epoxy matrix was investigated. A combination of each of these mixing metho...

Polymer nanocomposites are increasingly used in applications that are subjected to harsh environments. Owing to polymer's susceptibility to photodegradation, nanofillers in a polymer nanocomposite may be released into the environments during the composite's life cycle. Such release potentially poses an environmental health and safety problem and may hinder commercialization of these advanced ma...

In this paper, graphene oxide decorated with cerium oxide (CeO2) nanoparticles was prepared and used as anticorrosive pigments in epoxy nanocomposite coatings. The synthesized nanoparticle was characterized by FTIR, XRD, SEM, and EDX analyses. Graphene oxide decorated with CeO2 nanoparticles was dispersed in epoxy resin by sonication. The optimum nanoparticle content of th...

In this study, the mechanical properties of epoxy nanocomposites with graphene platelets, single-walled carbon nanotubes, and multi-walled carbon nanotube additives were compared at a nanofiller weight fraction of 0.1 +/- 0.002%. The mechanical properties measured were the Young's modulus, ultimate tensile strength, fracture toughness, fracture energy, and the material's resistance to fatigue c...

The toughness and coefficient of thermal expansion of a series of functionalized graphene sheet epoxy nanocomposites are investigated. Functionalized graphene sheets are produced by splitting graphite oxide into single graphene sheets through a rapid thermal expansion process. These graphene sheets contain ~ 10% oxygen due to the presence of hydroxide, epoxide, and carboxyl functional groups wh...