in order to reduce wear in gudgeon pin, bush and piston boss lubrication is done. oil used in national engine species was 10w40 with dynamic viscosity 5.5 mpa.s at 140 °c (the working temperature). in order to complete investigation the oil film hydrodynamics analysis in small end of connecting rod, a real full model engine with four cylinders has been simulated by avl excite5.1 software. in th...

In this paper, the effect of the Intake Valve Deactivation (IVDA) on engine performance is investigated in detail. Based on an optimization platform with Genetic Algorithm (GA) and engine thermodynamic model, the characteristics of the engine volumetric efficiency and pumping loss were studied under the cam-drive, Single Intake Valve (SIV) and Dual Intake Valves (DIV) operating modes, and the e...

ABSTRACT- Noise is considered as one of the most debilitating conditions in farming operations. In this study, a number of factors affecting the noise generated by Sampo 3065 combine harvesters were evaluated. Factors were engine speed and gear ratio for combines with and without original cabins. A factorial experiment arranged as a completely randomized design with four replicates was used. Re...

ABSTRACT: This is one of a series of white papers on systems modelling, analysis and control, prepared by Control Systems Principles.co.uk to give insights into important principles and processes in control. In control systems there are a number of generic systems and methods which are encountered in all areas of industry and technology. These white papers aim to explain these important systems...

the effects of unleaded gasoline and unleaded gasoline–ethanol blends on engine performance and pollutant emissions were investigated experimentally in a single cylinder, four-stroke spark-ignition engine with variable engine speeds (2600–3500 rpm). four different blends on a volume basis were applied. these are e0 (0% ethanol + 100% unleaded gasoline), e3 (3% ethanol + 97% unleaded gasoline), ...

in this study, the mf285 tractor engine vibrations resulting from the use of different combinations of biodiesel, bioethanol and diesel as fuel were studied. engine vibrations in three directions and three engine speeds: 1000, 1600 rpm 2000 and ten fuel level was measured. to investigate the influence of measured parameters on engine vibration of factorial design in a randomized complete block ...

many studies have been done on hybrid vehicles in the past few years. the full hybrid vehicles need a large number of batteries creating up to 300 (v) to meet the required voltage of electric motor. the size and weight of the batteries cause some problems. this research investigates the mild hybrid vehicle. this vehicle includes a small electric motor and a high power internal combustion engine...

excessive cutting depth during leveling of agricultural land increases power needed by the tractor drawbar and will result in undesirable slippage and excessive strain on the tractor engine.  the result of sustained excess will be the break-down of the tractor. an auxiliary blade depth controller to prevent overloading during leveling was designed, fabricated and evaluated in this study. the sy...

in order to comply with stringent pollutant emissions regulations, a detailed analysis of the engine combustion and emission is required. in this field, computational tools like cfd and engine cycle simulation play a fundamental role. therefore, the goal of the present work is to simulate a high speed di diesel engine and study the combustion and major diesel engine emissions with more details,...

operating an engine with homogeneous charge compression ignition (hcci) technique is a promising technique to lower nox and pm emissions of engines while achieving high efficiency and lower fuel consumption. nevertheless, applications for hcci are still limited due to the absence of a definite means to control ignition timing and narrow operating region. a single cylinder diesel engine with com...