Modeling a MEMS (Micro Electro-Mechanical Systems) electrostatic actuator in electrical domain is important for system simulation of the actuator along with its associated electronics. For instance, an integrated MEMS resonator used in a serial I/O PLL design modeled in electrical domain enables to optimize the system with the rest of the electronics. In this work, we have developed a simplifie...

Development of biomimetic actuators has been an essential motivation in the study of smart materials. However, few materials are capable of controlling complex twisting and bending deformations simultaneously or separately using a dynamic control system. Here, we report an ionic polymer-metal composite actuator having multiple-shape memory effect, and is able to perform complex motion by two ex...

This letter describes a method to analyze electromechanical stability of dielectric elastomer actuators. We write the free energy of an actuator using stretches and nominal electric displacement as generalized coordinates, and pre-stresses and voltage as control parameters. When the Hessian of the free-energy function ceases to be positive-definite, the actuator thins down drastically, often re...

Joint flexibility is a very important factor to consider in the controller design for robot manipulators if high performance is expected. Most of the research works on control of flexible-joint robots in literature have ignored the actuator dynamics to avoid complexity in controller design. The problem of designing nonlinear controller for a class of single-link flexible-joint robot manipulator...

In this paper, two different piezoelectric microactuator designs are studied. The corresponding devices were designed for optimal in-plane displacements and different high flexibilities, proven by electrical and optical characterization. Both actuators presented two dominant vibrational modes in the frequency range below 1 MHz: an out-of-plane bending and an in-plane extensional mode. Neverthel...

This work presents a new electrolysis-based microelectromechanical systems (MEMS) diaphragm actuator. Electrolysis is a technique for converting electrical energy to pneumatic energy. Theoretically electrolysis can achieve a strain of 136 000% and is capable of generating a pressure above 200 MPa. Electrolysis actuators require modest electrical power and produce minimal heat. Due to the large ...

In this work, the problem of a curved functionally graded piezoelectric (FGP) actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytica...

Present work delivers a systematical evaluation of actuation efficiency of a nano-particle electrode conducting polymer actuator fabricated based on Nitrile Butadiene Rubber (NBR). Attempts are made for maximizing mechanical functionality of the nano-particle electrode conducting polymer actuator that can be driven in the air. As the conducting polymer polypyrrole of the actuator is to be fabri...

An actuating system composed of nafion ionomeric polymer coated with single-walled carbon nanotubes electrodes was studied as an electromechanical actuator. The actuator gives a sizable mechanical response to low voltages (turn-on voltage of approximately 2.5 V) under open-air conditions, i.e., in the absence of a surrounding supporting electrolyte. The actuator is active under both dc and ac b...

This paper presents the modeling and design of an actuator consisting of an electrical motor and a magnetic gear. To minimize the overall actuator dimensions, both of the electromagnetic devices need to be optimally designed and matched. An issue in performing a simultaneous design as such arises from a high number of design variables that significantly increases the complexity of the optimizat...