In this study, the effect of operating parameters on dispersed phase holdup in liquid-liquid extraction process has been investigated. Three chemical systems (Toluene/Water, Butyl acetate/Water, and n-Butanol/Water) were utilized and holdup was considered in a wide range of interfacial tensions through a Scheibel extraction column. Various rotor speeds were examined on the certain velocities of...

in this research mass transfer coefficient under jetting regime in different directions (from dispersed to continuous and continuous to dispersed phase) has been studied using an experimental setup. n-butanol-succinic acid-water with low interfacial tension has been selected as experimental chemical system. the effects of various parameters such as jet velocity, nozzle diameter and the height o...

Background In a system of two immiscible liquids, usually water (or an aqueous solution) and an organic liquid (e.g. an oil), there are two general types of dispersions which can be formed depending on the conditions of the system. A water-in-oil (W/O) dispersion is a dispersion formed when the aqueous phase is dispersed in the organic phase and an oil-in-water (O/W) dispersion is a dispersion ...

In this work, the dispersed phase holdup in a Kühni extraction column is predicted using intelligent methods and a new empirical correlation. Intelligent techniques, including multilayer perceptron and radial basis functions network are used in the prediction of the dispersed phase holdup. To design the network structure and train and test the networks, 174 sets of experimental data are used. T...

an experimental study has been conducted on the hydrodynamics of a stage mixer-settler to obtain an appropriate design. in this paper several tests was performed to investigate full factorial design of experiments. since each test was repeated seven times, the repeatability of the test was confirmed (p=1 bar and t=25 °c). sauter diameter was determined by photographing both the mixer and settle...

We have measured the response of shear stress to ac electric fields under steady shear flow in the droplet-dispersed phase of an immiscible polymer blend. A characteristic mode was found under steady shear flow, the relaxation frequency of which increased with increasing the shear rate. In the frequency dispersion, a scaling relation derived from dimensional analysis was confirmed to hold. The ...

Solid oxide fuel cells (SOFCs) are inevitably affected by the tensile stress field imposed by the rigid substrate during constrained sintering, which strongly affects microstructural evolution and flaw generation in the fabrication process and subsequent operation. In the case of sintering a composite cathode, one component acts as a continuous matrix phase while the other acts as a dispersed p...

Plastic rearrangements play a crucial role in the characterization of soft-glassy materials, such as emulsions and foams. Based on numerical simulations of soft-glassy systems, we study the dynamics of plastic rearrangements at the hydrodynamic scales where thermal fluctuations can be neglected. Plastic rearrangements require an energy input, which can be either provided by external sources, or...

Emulsions are a central component of many modern formulations in food, pharmaceuticals, agrichemicals and personal care products. The droplets in these formulations are limited to being spherical as a consequence of the interfacial tension between the dispersed phase and continuous phase. The ability to control emulsion droplet morphology and stabilize non-spherical droplets would enable the mo...

This paper describes the mechanism of formation of bubbles of nitrogen in water containing Tween 20 as a surfactant, and of droplets of water in hexadecane containing Span 80 as a surfactant. The study of these microfluidic systems compares two or four flow-focusing generators coupled through shared inlets, supplying the continuous phase, and through a common outlet channel. The processes that ...