نتایج جستجو برای: di step aluminum anodization

تعداد نتایج: 568076  

2006
Daniel Lo R. Arief Budiman

We report here on the fabrication of porous anodic alumina PAA films from commercially available impure aluminum foil. While the expensive ultrapure PAA films are restricted to potential applications in nanoelectrophotonics, the impure PAA films are more suitable for large-scale applications, such as in catalysis and filtration. The anodization current behavior and chemical composition of the r...

Journal: :Jitsumu Hyomen Gijutsu 1981

2013
Josefin Nissa Fredrik Ejserholm Martin Bengtsson

With the aim of developing a process for surface enlargement on an electrode for measuring brain activity attempts have been made to fabricate a porous anodic alumina membrane directly on the electrode. The porous membrane was intended to be used as scaffold for deposition of an electrically conducting polymer on the electrode surface. A silicon wafer with gold electrodes was the base onto whic...

This study was designed to probe the fabrication of unique silver and gold nano-structures engaging a self-designed chitosan-porous anodic alumina nano-composite as a template. Porous anodic alumina has been manufactured by di-step aluminum anodization in an oxalic acid electrolytic bath. The surface properties of porous anodic alumina were reinforced by chitosan neutralized in sodium hydro...

Journal: :ACS nano 2008
Kathrin Schwirn Woo Lee Reinald Hillebrand Martin Steinhart Kornelius Nielsch Ulrich Gösele

The self-ordering of nanoporous anodic aluminum oxide (AAO) in the course of the hard anodization (HA) of aluminum in sulfuric acid (H2SO4) solutions at anodization voltages ranging from 27 to 80 V was investigated. Direct H2SO4-HA yielded AAOs with hexagonal pore arrays having interpore distances D(int) ranging from 72 to 145 nm. However, the AAOs were mechanically unstable and cracks formed a...

In this work, magnetic Ni nanowire arrays were ac-pulse electrodeposited into the anodic aluminum oxide (AAO) template fabricated by the common two-step anodization technique. The barrier layers at the  bottom of the pores were exponentially thinned in a non-equilibrium anodization process to 8, 12, 16 and 20 V. These were fabricated using the constant of 15 mA deposition current, 48 mS off-tim...

Journal: :Nanotechnology 2008
M Gowtham L Eude C S Cojocaru B Marquardt H J Jeong P Legagneux K K Song D Pribat

Confined lateral alumina templates are fabricated with different pore sizes by changing the acid electrolyte and the anodization voltage. The control of the number of pore rows down to one dimension is also achieved, by controlling the thickness of the starting aluminum film as well as the anodization voltage. We observe that the mechanism of pore formation in the lateral regime is very similar...

Journal: :ACS applied materials & interfaces 2013
Hee Han Sang-Joon Park Jong Shik Jang Hyun Ryu Kyung Joong Kim Sunggi Baik Woo Lee

Wet-chemical etching of the barrier oxide layer of anodic aluminum oxide (AAO) was systematically investigated by using scanning electron microscopy (SEM), secondary ion mass spectrometry (SIMS), and a newly devised experimental setup that allows accurate in situ determination of the pore opening point during chemical etching of the barrier oxide layer. We found that opening of the barrier oxid...

2015
S. J. Park B. K. Ahn P. S. Alegaonkar H. J. Shin J. B. Yoo

Atomic layer deposition (ALD) has been used in advanced applications where thin layers of materials with precise thickness down to the nanometer scale are needed. Using anodic oxidation, we prepared the porous alumina. Anodic oxidation was carried out in 5 C 0.3M oxalic acid with anodizing voltages (~ 40 V) and two step anodization method. SEM shows that, these porous anodic oxides are well ali...

2012
Chatdanai Lumdee Pieter G. Kik

Frequency control of plasmon resonances is important for optical sensing applications such as Surface Enhanced Raman Spectroscopy. Prior studies that investigated substrate-based control of noble metal nanoparticle plasmon resonances mostly relied on metal substrates with organic or oxide spacer layers that provided a fixed resonance frequency after particle deposition. Here we present a new ap...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید