We report high resolution angle-resolved photo-emission spectroscopy (ARPES)measurements of detwinned FeSe single crystals. The application of amechanical strain is used to promote the volume fraction of one of the orthorhombic domains in the sample, whichwe estimate to be 80% detwinned. While the full structure of the electron pockets consisting of two crossed ellipsesmay be observed in the te...

Coarse crystals of martensite can form by the coalescence of thin individual platelets of martensite under appropriate circumstances. Although these coarse grains are essentially single crystals, there exist significant orientation gradients across their dimensions. It is demonstrated that these gradients arise because of the plasticity induced in austenite due to the transformation strain asso...

The influence of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel stainless-steel alloy (Fe-17Cr-7Mn-4Ni) has been investigated. The alloys containing 0.1 wtYo or more nitrogen are fully austenitic at room temperature; those containing less nitrogen consist of a mixture of austenite, martensite and S-ferrite. The alloys containing less than 0.2 wtYo nitrogen are m...

The strength of mixed microstructures of bainite and martensite can peak at an intermediate volume fraction of martensite has been published by recently experimental studies. A quantitative interpretation of these observations is achieved by modelling the mechanical properties of mixed microstructures of bainite and martensite. The peak in the curve of the strength as a function of the volume f...

Modern TRIP assisted steels contain retained austenite with carbon concentrations in excess of 1 wt-%. Some of their mechanical properties, in particular the toughness and ductility, rely on the diffusionless transformation of this austenite into high-carbon martensite, induced by stress and strain. The properties can be excellent in spite of the fact that freshly formed high-carbon martensite ...

The purpose of this review was to investigate the correlation between magnetism and crystallographic structures as it relates to the martensite transformation of Ni2MnGa type alloys, which undergo martensite transformation below the Curie temperature. In particular, this paper focused on the physical properties in magnetic fields. Recent researches show that the martensite starting temperature ...

The superelastic properties and stress-induced martensite (SIM) stabilization have been studied in a shape memory Ni51.1Fe16.4Ga26.3Co6.2 single crystal. crystal, characterized by thermally induced forward martensitic transformation temperature around 56 °C the initial state, has submitted to compression mechanical testing at different temperatures well above, near below (MT). After each test, ...

Shape memory alloys exhibit a high damping capacity in the mktensite state. Results obtained from both DMA and cyclic tests under tension-compression load show that the martensite damping capacity in NiTi SMAs is a function of both strain amplitude and annealing temperature. Internal friction due to movements of martensite twin boundaries within both elastic (accommodation) and inelastic (reori...

The name martensite is after the German scientist Martens. It was used originally to describe the hard microconstituent found in quenched steels. Martensite remains of the greatest technological importance in steels where it can confer an outstanding combination of strength (> 3500MPa) and toughness (> 200MPam 1 2 ). Many materials other than steel are now known to exhibit the same type of soli...