The structural parameters, band structures and density of states of anatase TiO2 co-doped with Cu and S were calculated by first-principles based on the density functional theory. The results indicate that the volumes of the co-doped TiO2 increase due to the lattice distortion. The calculated X-ray diffraction pattern shows that the crystal phase of TiO2 is still kept as anatase after Cu and S ...

Sn–Ag–Cu composite solders reinforced with nano-sized, nonreacting, noncoarsening 1 wt% TiO2 particles were prepared by mechanically dispersing TiO2 nano-particles into Sn–Ag–Cu solder powder and the interfacial morphology of the solder and flexible BGA substrates were characterized metallographically. At their interfaces, different types of scallop-shaped intermetallic compound layers such as ...

In the present work, different concentrations of Cu ion (1, 2, 5 and 10 wt %) were doped in the TiO2 film by a sol-gel method and dip coating process. The morphology of the Cu-doped TiO2 films were characterized by scanning electron microscopy (SEM) and the results showed that the doped Cu made no change to the TiO2 films. The nitric oxide (NO) release experiment showed that these Cu-doped surf...

A tubular array of TiO2 nanotubes on Ti matrix was used as a support for Ag or Cu sputter-deposited layers intended for surface-enhanced Raman scattering (SERS) investigations. Composite samples of Ag/TiO2-nanotube/Ti and Cu/TiO2nanotube/Ti were studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES and SAM) to reveal their characteristic morphological a...

Au, Cu and bimetallic Au-Cu nanoparticles were synthesized on the surface of commercial TiO2 compounds (P25) by reduction of the metal precursors with tetrakis (hydroxymethyl) phosphonium chloride (THPC) (0.5 % in weight). The alloyed structure of Au-Cu NPs was confirmed by HAADF-STEM, EDS, HRTEM and XPS techniques. The photocatalytic properties of the modified TiO2 have been studied for phenol...

Non-noble metal nanoparticles are becoming more and more important in catalysis recently. Cu/CuO nanoclusters on highly ordered TiO2 nanotube arrays are successfully developed by a surfactant-free photoreduction method. This non-noble metal Cu/CuO-TiO2 catalyst exhibits excellent catalytic activity and stability for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with the presence...

Novel ultrathin TiO2–Cu nanoparticulate films sputtered by highly ionized pulsed plasma magnetron sputtering (HIPIMS) lead to faster bacterial inactivation compared to more traditional sputtering approaches with an appreciable metal saving. HIPIMS sputtering induces a strong interaction of the TiO2–Cu-ions (M ) with the polyester surface due to the high fraction and density of M-ions interactin...

This research study the application of the immobilized TiO2 layer and Cu-TiO2 layer on graphite substrate as a negative electrode or anode for Li-ion battery. The titania layer was produced through chemical bath deposition method, meanwhile Cu particles were deposited electrochemically. A material can be used as an electrode as it has capability to intercalates Li ions into its crystal structur...

The corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel, in different corrosion environments. Nano meter thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targ...

For the sustainable production of hydrogen by photocatalysis, the use of renewable resources such as water, organic compounds from plant biomass and earth abundant metal promoters is desired. We herein describe the previously not reported "one-pot" photoassisted synthesis of a binary metal-nitrogen promoted Cu(0)-N-TiO2 photocatalyst from a N-TiO2 precursor by photodeposition of copper directly...