The nanocrystallization processes in Fe-Si-B-Nb-Cu and Fe-Nd-B(-Cu-Nb) amorphous alloys have been studied by transmission electron microscopy (TEM) and a three dimensional atom probe (3DAP). Cu additions are effective in refining the nanocrystalline microstructures of an Fe74.5Si13.5B8Nb3Cu1 alloy and an Fe3B/Nd2Fe14B nanocomposite microstructure. This is because Cu atoms form a high density of...

in this work, homogeneous thermochemical co-precipitation method was used to fabricate w-25wt%cu nanocomposite. synthesized nanocomposite powder was calcined and reduced. a hydrogen atmosphere sintering at 1200oc for 105 consolidated the product up to a density close to 98% theoretical density. wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 n an...

A novel ternary Punica granatum L-Cu/Cu2O/CuO/ZnO nanocomposite was successfully synthesised via green route. In this work, we demonstrate that the green synthesis of metal oxides is more viable and facile compare to other methods, i.e., physical and chemical routes while presenting a potential electrode for energy applications. The prepared nanocomposite was characterised by both microscopic a...

Titanium (Ti) and its alloys have been widely used in clinics for years. However, their bio-inert surface challenges application in patients with compromised surgical conditions. Numerous studies were conducted to modify the surface topography and chemical composition of Ti substrates, for the purpose of obtaining antibacterial, angiogenic, and osteogenic activities. In this study, using green ...

Shape memory polymer (SMP) nanocomposites with a fast electro-actuation speed were prepared by dispersing Cu-decorated carbon nanotubes (CNTs) (Cu-CNTs, 1 wt %, 2 wt %, and 3 wt %) in a polylactic acid (PLA)/epoxidized soybean oil (ESO) blend matrix. The shape memory effect (SME) induced by an electrical current was investigated by a fold-deploy "U"-shape bending test. In addition, the Cu-CNT d...

A fine layered nanocomposite with a total thickness of about 200 nm was formed on the surface of an Al63Cu25Fe12 quasicrystal (QC). The nanocomposite was found to exhibit high catalytic performance for steam reforming of methanol. The nanocomposite was formed by a self-assembly process, by leaching the Al-Cu-Fe QC using a 5 wt% Na2CO3 aqueous solution followed by calcination in air at 873 K. Th...

in this article, preparation of polypyrrole and its nanocomposites as adsorbents werediscussed and the capability of separation of copper ions from aqueous solution were studied.polypyrrole was prepared by chemical oxidative polymerization method of pyrrole usingfecl3 as an oxidant. the removal of cu (ii) was investigated using ppy, ppy/tio2 andppy/tio2/dhsna nanocomposites. the products were i...

This work aimed to develop novel composite biomaterials for bone tissue engineering (BTE) made of bioactive glass nanoparticles (Nbg) and alginate cross-linked with Cu(2+) or Ca(2+) (AlgNbgCu, AlgNbgCa, respectively). Two-dimensional scaffolds were prepared and the nanocomposite biomaterials were characterized in terms of morphology, mechanical strength, bioactivity, biodegradability, swelling ...

Cu₂O-reduced graphene oxide nanocomposite (Cu₂O-RGO) was used to modify glassy carbon electrodes (GCE), and applied for the determination of dopamine (DA). The microstructure of Cu₂O-RGO nanocomposite material was characterized by scanning electron microscope. Then the electrochemical reduction condition for preparing Cu₂O-RGO/GCE and experimental conditions for determining DA were further opti...

Traditional nanostructured metals are inherently comprised of a high density of high-energy interfaces that make this class of materials not stable in extreme conditions. Therefore, high performance bulk nanostructured metals containing stable interfaces are highly desirable for extreme environments applications. Here, we reported an attractive bulk Cu/V nanolamellar composite that was successf...