In this work, the removal of copper from an aqueous solution by granular activated carbon (GAC) in the presence of competitor ions was studied. A batch adsorption was carried out and different parameters such as pH, contact time, initial copper concentration and competitor ions concentration were changed to determine the optimum conditions for adsorption. The optimum pH required for maximum ads...

the feasibility of kaolinite used as a low-cost adsorbent for the removal of pb(ii), zn(ii) and cu(ii) from aqueous solutions was investigated. during the removal process, batch technique was used, and the effects of heavy metal concentration and contact time on adsorption efficiency at ph of 4.5, under a constant temperature of 20?1 ?c were studied. the experimental results were analyzed using...

Optimization of Cd (II), Zn (II) and Cu (II) biosorption from contaminated water were performed as function of parameters (pH, contact time, initial metal ions concentration and yeast dose). The experimental results showed that the highest equilibrium adsorption capacity at the optimum pH were 8.5 for Cd (II) and 6 for Zn (II) and 6 for Cu (II). Optimum pH values were carried out to evaluate ot...

Optimization of Cd (II), Zn (II) and Cu (II) biosorption from contaminated water were performed as function of parameters (pH, contact time, initial metal ions concentration and yeast dose). The experimental results showed that the highest equilibrium adsorption capacity at the optimum pH were 8.5 for Cd (II) and 6 for Zn (II) and 6 for Cu (II). Optimum pH values were carried out to evaluate ot...

Humic acid (HA) could become a useful agent for removing trace amounts of Cu(II) from contaminated seawater. This study reports on the use of a thin alginate membrane (TAM) containing immobilized HA as a Cu(II) binding agent for this purpose. The removal efficiency of Cu(II) by a TAM functionalized with HA was significantly increased compared to TAM alone. In this removal method, HA extracted f...

An intensive study has been made to see the performance of the different liner materials with bentonite on the removal efficiency of Cu(II) and Zn(II) from industrial leachate. An artificial neural network (ANN) was used to display the significant levels of the analyzed liner materials on the removal efficiency. The statistical analysis proves that the effect of natural zeolite was significant ...

The feasibility of kaolinite used as a low-cost adsorbent for the removal of Pb(II), Zn(II) and Cu(II) from aqueous solutions was investigated. During the removal process, batch technique was used, and the effects of heavy metal concentration and contact time on adsorption efficiency at pH of 4.5, under a constant temperature of 20?1 ?C were studied. The experimental results were analyzed using...

The batch sorption capability of Romanian pine bark for the removal of Cu(II) and Zn(II) ions from diluted aqueous solutions was investigated as a function of initial pH, contact time, and temperature. The metal sorption sequence is Cu > Zn. The experimental data for Cu(II) and Zn(II) ions retention on the tested bark of Pinus sylvestris L. showed a better compliance with the pseudo–second orde...

A compact nucleated precipitation technology using two fluidised sand columns in series was developed to pretreat model metal-plating wastewater containing high concentrations of Cu(II) and Cr(VI). Since either Cu(II) precipitation or Cr(VI) co-removal with Cu(II) precipitation was found to be highly pH dependent in batch tests, the continuous-flow studies were conducted under different pHs. Ex...

To study the extent of removal of Cu(II) ions from the electroplating industrial effluent, metal resistant fungal strain of Penicillium janthinellum was selected for the present study. Response surface methodology was used to optimize the sorption process variables i.e. temperature (20-40 oC), biomass concentration (0.5-2.5 mg/l), pH (2.0-6.0) and initial concentration of metal ions (20-100 mg/...