hydrogenation reaction with n-heptane on pt/al2o3 catalyst was investigated under the steady state condition in a fixed bed reactor. the catalyst was prepared under a variety of conditions, but the one chosen was non-acidic that is not considered a hydrocracking catalyst. the main objective was to vary the selectivity of n-heptane as a function of reaction variables especially the partial press...

The fracture toughness and uniaxial tensile yield strengths of unmodified and CTBN-rubbermodified epoxies were measured under hydrostatic pressure. The purpose of these experiments was to learn how suppressing cavitation in rubber particles affects the deformation mechanisms and the fracture toughness of rubber-modified epoxy. It was found that the cavitation of CTBN-rubber could be suppressed ...

Unusually rapid closure of stressed fractures, observed in the initial stages of loading and at low temperatures, is examined using models for subcritical crack growth and pressure solution. The model for stress corrosion examines tensile stress concentrations induced at the Hertzian contact of propping fracture asperities, and mediates fracture growth according to a kinetic rate law. Conversel...

Catalyitic reforming is one of the refinery processes in catalyst conversion that results to anincreases in octane number of naphtan which leads to production of gasoline with higher octanenumber. Hydrocarbons with high octan number that are produced in reforming process are as;aromatics, paraffins, isomers and etc.Not only Aromatics are used as fuel for motors but they are also useful in petro...

The paper presents a new analytical model to study the evolution of radial cracking around a corroding steel reinforcement bar embedded in concrete. The concrete cover for the corroding rebar is modelled as a thick-walled cylinder subject to axisymmetrical displacement constraint at the internal boundary generated by expansive corrosion products. A bilinear softening curve reflecting realistic ...

improvements in the properties of ordinary sidewall compound (nr/br) with the addition of epdm by reactive processing method were evaluated. the results show that ozone resistance of these sidewalls was improved with increased addition of epdm. also the tensile strength and elongation-at-break were increased in comparison with nrbrepdm compounds that were made by non-reactive processing. sem ph...

Database cracking has been an area of active research in recent years. The core idea of database cracking is to create indexes adaptively and incrementally as a side-product of query processing. Several works have proposed different cracking techniques for different aspects including updates, tuple-reconstruction, convergence, concurrency-control, and robustness. However, there is a lack of any...

The authors developed an environment-friendly demolition mechanical system for a large reinforced concrete structure actual site. steam pressure cracking agent (SPC, non-explosive) is method that can safely and quickly separate because it produces lesser vibration sound than the blasting method, which uses explosives. showed direction of be controlled by induction hole. principle control elasti...

The European standard EN 438-2 (2019) describes a method to assess the resistance cracking of high-pressure laminate (HPL). In setup, samples’ shrinkage at temperature 50 °C for 6 h is restrained by metal clamp. resulting tensile stress may lead laminate. With intention gain additional insight into parameters and influencing factors test, 43 laminates was tested in accordance with prolonged tes...