the combination of flexural frame and shear wall is one of the suitable systems to apply in reinforced concrete buildings. the deflections of flexural frame become limited due to the high stiffness of wall and the interaction of these systems. tall buildings even higher than fifty stories can be designed by using frame- wall systems. with respect to special behavior of flexural frame or shear w...

In this research in-plane shear Behavior of composite steel-concrete shear walls was investigated considering the Effects of steel plates thickness, spaces between shear studs, shape and type of shear studs and existing of minimum reinforcement in wall section. Several finite element models were analyzed and Numerical results of two models were taken under verification with existent experimenta...

The main objective of this study was to numerically assess the effect of boundary elements with different types of steel and concrete materials on nonlinear behavior of composite steel–reinforced concrete wall (CSRCW) by employing ABAQUS software. Two types of common steel profiles including box and I-shaped sections, located at the middle and extremities of the wall, were employed to assess th...

The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...

Nonlinear simulations for structures under disasters have been widely focused on in recent years. However, precise modeling for the nonlinear behavior of reinforced concrete (RC) shear walls, which are the major lateral-force-resistant structural member in high-rise buildings, still has not been successfully solved. In this paper, based on the principles of composite material mechanics, a multi...

Abstract: Shear deformation is the most principal deformation in the lateral deformation of shear wall built with precast hollow slab which is designed to be strong shearing and weak bending. The special mechanical characteristic of the shear wall is the relative deformation of the concrete on both sides of vertical and inner joint respectively. The study introduces the measuring scheme of shea...

In this paper, a new approach for nonlinear numerical modelling of the reinforced concrete shear walls with consideration of bar-concrete interaction and shear deformation is proposed. Bar and concrete stress-strain relations, the bar-concrete interaction, the shear stress-strain relation and, also, their cyclic behavior including the strength degradation and stiffness degradation are adopted a...

To evaluate the seismic performance of pre-cast concrete shear wall with vertical reinforcements spliced by two different grout ways, quasi-static tests of two concrete shear walls holed by prefabricated corrugated pipe and one concrete shear wall holed by drawing out the pipe were tested. The test results showed that the wall holed by prefabricated corrugated pipe was basically the same as the...

In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...