this study investigates removing ash and pyrite sulphur from bitumen by column flotation process. central composite design (ccd) of response surface methodology (rsm) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. the effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...

An efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. The bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. The Box-Behnken Design (BBD) was employed to design the experiments, to ...

A separation technique which has recently received a sharp increase in research activities is "ion flotation". This technique has four important advantages for treating wastewaters: low energy consumption, small space requirements, small volume of sludge and acting selectively. The present study aims to optimize parameters of ion flotation for cadmium removal in simulated wastewater at laborato...

A highly efficient froth flotation procedure has been developed for harvesting algae from dilute suspensions. The method does not depend upon the addition of flotants. Harvesting is carried out in a long column containing the feed solution which is aerated from below. A stable column of foam is produced and harvested from a side arm near the top of the column. The cell concentration of the harv...

For over two decades, LOOP (French acronym for Process Observation and Optimization Laboratory) researchers have been working at developing and/or improving specific sensors for flotation columns and their use for automatic control of this process. Several papers have already been published for the mineral processing industrial and scientific community in peer-reviewed journals and conference p...

The aim of this project was to remove chloride ions from Eshidiya industrial waste water to be reused in the flotation cells. The industrial wastewater was treated by passing it through ion exchange column. During the experiments, two types of resins were used: anion resin and mixed resin (cation / anion).The selectivity coefficient and the separation factor were calculated in those experiments...

Unburned carbon (UC) is the major source of organic contaminants in municipal solid waste (MSW) fly ash. So most organic contaminants can be removed by the removal of the UC from the MSW fly ash. In this paper, we first used a technique of column flotation to remove UC from MSW fly ash. The influences of column flotation parameters on the recovery efficiency of UC were systematically studied. I...